NE555 frecuencia y pwm [Kicad]
aalonsopuig·KiCad_Ejemplos·NE555 frecuencia y pwm/NE555 frecuencia y pwm [Kicad].kicad_pcb
About the NE555 frecuencia y pwm [Kicad] PCB
NE555 frecuencia y pwm [Kicad] is an open source PCB design by aalonsopuig, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50 × 40 mm, with 15 components from 10 distinct parts.
Other key parts include the NE555P. By type, the board carries 3 diodes, 3 resistors, 2 connectors, 2 capacitors, 1 IC and 1 transistor.
From the project
Ejemplos de circuitos utilizados en las clases que imparto en la universidad
Main components on the NE555 frecuencia y pwm [Kicad]
NE555 frecuencia y pwm [Kicad] bill of materials (BOM)
15 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | IRLZ24 | TO-220-3_Vertical | Q1 |
| 1 | Power | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | Motor | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | Heatsink | Heatsink TO-220 | HS1 |
| 2 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1(Frecuencia)1, RV2(Duty)1 |
| 3 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3 |
| 2 | 10n | C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
NE555 frecuencia y pwm [Kicad] design files
The KiCad project lives in the aalonsopuig/KiCad_Ejemplos repository on GitHub; these links point at the commit this page was built from.
NE555 frecuencia y pwm [Kicad]: common questions
How big is the NE555 frecuencia y pwm [Kicad] PCB?
The NE555 frecuencia y pwm [Kicad] measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NE555 frecuencia y pwm [Kicad]?
15 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the NE555 frecuencia y pwm [Kicad] design files?
From the aalonsopuig/KiCad_Ejemplos repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NE555 frecuencia y pwm [Kicad] design in my own project?
Yes, under the terms of its GPL-3.0 license, which aalonsopuig chose for the repository.
More boards in KiCad_Ejemplos
Segundero 555
aalonsopuig
80 × 50 mm20 parts2LGPL-3.00Amplificador de baja señal
aalonsopuig
54 × 27 mm11 parts2LGPL-3.00B Regulador tension variable
aalonsopuig
50.8 × 30.5 mm10 parts2LGPL-3.00Lm317 clase2
aalonsopuig
50 × 30 mm10 parts2LGPL-3.00Tracking
aalonsopuig
73 × 39 mm9 parts2LGPL-3.00Circuito 1
aalonsopuig
35.6 × 35.6 mm9 parts2LGPL-3.00Tracking voltage regulator
aalonsopuig
60 × 30 mm9 parts2LGPL-3.00Lm555 clase
aalonsopuig
39.3 × 38.8 mm7 parts2LGPL-3.00Lm555
aalonsopuig
38.8 × 24.8 mm6 parts2LGPL-3.00