Voltage monitoring
AaravD356·voltage-monitoring-PCB
About the Voltage monitoring PCB
Voltage monitoring is an open source STM32 PCB design by AaravD356, published on GitHub. It is a 2-layer board measuring 53.5 × 39 mm, with 44 components from 25 distinct parts.
Its main chip is the STM32L476RGTx, from the STM32 family. Other key parts include the TCM809 and MCP2562T-H/SN. By type, the board carries 15 capacitors, 15 resistors, 7 connectors, 3 ICs, 1 crystal and 1 switch.
From the project
UMD Mars Rover team PCB
Main components on the Voltage monitoring
Voltage monitoring bill of materials (BOM)
44 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCM809 | SOT-23_Handsoldering | U1 |
| 1 | STM32L476RGTx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | MCP2562T-H/SN | can_transceiver | U3 |
| 1 | 830208214709 | oscillator | Y1 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J1 |
| 2 | Conn_01x02_Pin | can_molex_header | J2, J5 |
| 1 | B7B-XH-A | 7-PinJST-ad | J3 |
| 2 | B2B-XH-A | 2-PinJST-ad | J4, J7 |
| 1 | 1724480004 | power_header | J6 |
| 1 | TL59NF160Q | reset_button | S1 |
| 1 | LED | small_led | D1 |
| 1 | FerriteBead | ferrite_bead02BH1J | FB1 |
| 3 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C12 |
| 1 | 15pf | 15pf_cap | C2 |
| 8 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C9, C13, C15 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 2 | 1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C14 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 8 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R5, R7, R9, R11, R13, R15 |
| 1 | 82k | 82kOhmRes-ad | R4 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 68k | 68kOhmRes-ad | R6 |
| 1 | 47k | 47kOhmRes-ad | R8 |
| 1 | 33k | 33kOhmRes-ad | R10 |
| 1 | 20k | 20kOhmRes-ad | R12 |
| 1 | 6.8k | 6.8kOhmRes-ad | R14 |
Voltage monitoring design files
The KiCad project lives in the AaravD356/voltage-monitoring-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutVoltageMonitoringPCB.kicad_pcb
- SchematicVoltageMonitoringPCB.kicad_sch
Voltage monitoring: common questions
What microcontroller does the Voltage monitoring use?
The Voltage monitoring is built around the STM32L476RGTx, from the STM32 family.
How big is the Voltage monitoring PCB?
The Voltage monitoring measures 53.5 × 39 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voltage monitoring?
44 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Voltage monitoring design files?
From the AaravD356/voltage-monitoring-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Voltage monitoring design in my own project?
The repository has no license, so all rights stay with AaravD356. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Voltage monitoring without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k