12 open source boards using the STM32L476RGTx
Real designs built with the STM32L476RGTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MorphWatch-STM32
deebot
33.8 × 46 mm63 parts4LNo license12STM32
Test Projekt
Siegmundshof93
86.2 × 91.9 mm147 parts2LNo license0STM32
STDC
SebastianThomas
38 × 48 mm120 parts4LNo license0STM32
--MagneticField---Acceleration-Sensors
ahoang205
76.1 × 74.9 mm92 parts2LMIT0STM32
Main
vives-projectwerk-2021
80 × 70 mm64 parts4LNo license0STM32
PGE
sKulll-J
85.5 × 66.8 mm51 parts2LNo license0STM32
Smart watch
zzatuchni
40 × 40 mm50 parts4LNo license0STM32
Senior-Design-Dog-Collar
dmanojlovic
64.8 × 61 mm48 parts2LNo license0STM32
Voltage monitoring
AaravD356
53.5 × 39 mm44 parts2LNo license0STM32
Main PCB 2
vives-projectwerk-2021
80 × 70 mm46 parts4LNo license0STM32
OBC&COMMS subsystem
nanosatlab
40 × 40 mm65 parts4LNo license9STM32
PCB Template
22619291
42 × 42 mm4 parts2LNo license0
How designs wire the STM32L476RGTx
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the STM32L476RGTx connects to, and the resistors, capacitors and other passives placed on it.
- The PC3 pin is left unconnected on 11 of 11 designs.
- The PD2 pin is left unconnected on 11 of 11 designs.
- The VBAT pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 4.7 µF).
- The BOOT0 pin has a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 73% · not connected 18% |
|
| PC13pin 2 | Connected to: Not connected 82% | — |
| PC14pin 3 | Connected to: Signal 55% · not connected 45% |
|
| PC15pin 4 | Connected to: Signal 55% · not connected 45% |
|
| PH0pin 5 | Connected to: Signal 55% · not connected 45% |
|
| PH1pin 6 | Connected to: Not connected 64% · a signal 36% | — |
| NRSTpin 7 | Connected to: A connector 73% |
|
| PC2pin 10 | Connected to: Not connected 73% · a signal 27% | — |
| PC3pin 11 | Connected to: Not connected 100% | — |
| VSSApin 12 | Connected to: GND 82% | — |
| VDDApin 13 | Connected to: 3.3V 82% |
|
| PA0pin 14 | Connected to: Not connected 64% · a signal 36% | — |
| PA1pin 15 | Connected to: Not connected 64% · a signal 36% | — |
| PA2pin 16 | Connected to: Not connected 64% · a signal 36% | — |
| VSSpin 18, 31, 47, 63 | Connected to: GND 82% | — |
| VDDpin 19, 32, 64 | Connected to: 3.3V 91% |
|
| PA6pin 22 | Connected to: Not connected 64% · a signal 36% | — |
| PB0pin 26 | Connected to: Not connected 64% · a signal 36% | — |
| PB1pin 27 | Connected to: Not connected 73% · a signal 27% | — |
| PB10pin 29 | Connected to: Not connected 64% · a signal 36% | — |
| PB12pin 33 | Connected to: Not connected 64% · a signal 36% | — |
| PB15pin 36 | Connected to: Not connected 64% · a signal 36% | — |
| PC6pin 37 | Connected to: Not connected 91% | — |
| PC7pin 38 | Connected to: Not connected 91% | — |
| PC8pin 39 | Connected to: Not connected 82% · a signal 18% | — |
| PC9pin 40 | Connected to: Not connected 73% · a signal 27% | — |
| PA8pin 41 | Connected to: Not connected 64% · a signal 36% | — |
| PA12pin 45 | Connected to: Not connected 64% · a signal 36% | — |
| VDDUSBpin 48 | Connected to: 3.3V 73% · not connected 27% |
|
| PA15pin 50 | Connected to: Not connected 82% · a signal 18% | — |
| PC10pin 51 | Connected to: Not connected 82% · a signal 18% | — |
| PC11pin 52 | Connected to: Not connected 73% · a signal 27% | — |
| PC12pin 53 | Connected to: Not connected 91% | — |
| PD2pin 54 | Connected to: Not connected 100% | — |
| PB4pin 56 | Connected to: Not connected 73% · a signal 27% | — |
| PB6pin 58 | Connected to: Not connected 55% · a signal 45% |
|
| PB7pin 59 | Connected to: Not connected 64% · a signal 36% |
|
| BOOT0pin 60 | Connected to: Signal 82% · not connected 18% |
|
| PB8pin 61 | Connected to: Not connected 64% · a signal 36% | — |
| PB9pin 62 | Connected to: Not connected 73% · a signal 27% | — |
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MorphWatch-STM32 by deebot, OBC&COMMS subsystem by nanosatlab, PCB Template by 22619291 and Voltage monitoring-PCB by AaravD356.
The STM32L476RGTx in open source designs
The gallery holds 12 open source boards using the STM32L476RGTx from 11 GitHub repositories; a typical one measures about 59.1 × 54.5 mm and carries around 57 components.
50% are two-layer designs, the rest use four layers or more, and 8% carry an open source license.
The most starred is MorphWatch-STM32 by deebot.
Microcontrollers on boards using the STM32L476RGTx
What boards using the STM32L476RGTx are built for
STM32L476RGTx: common questions
Where can I find a STM32L476RGTx reference design?
Each of the 12 boards on this page is a real design using the STM32L476RGTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32L476RGTx PC3 pin connected?
The PC3 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the STM32L476RGTx.
How is the STM32L476RGTx PD2 pin connected?
The PD2 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the STM32L476RGTx.
What decoupling capacitors do designs use on the STM32L476RGTx VBAT pin?
The VBAT pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the STM32L476RGTx.
Which microcontrollers do boards using the STM32L476RGTx use?
Most are built on STM32 (12).
How big is a typical board using the STM32L476RGTx?
The median is 59.1 × 54.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the STM32L476RGTx?
By GitHub stars, MorphWatch-STM32 by deebot, with 12 stars.
Can I simulate one of these boards using the STM32L476RGTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.