Learn With Me
Abdelrahman-Elnahrawy·KiCad·projects/Learn_With_Me/Learn_With_Me.kicad_pcb
About the Learn With Me PCB
Learn With Me is an open source PCB design by Abdelrahman-Elnahrawy, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 58.4 × 30.8 mm, with 20 components from 9 distinct parts.
By type, the board carries 9 test points, 4 diodes, 4 resistors, 1 connector and 1 switch.
From the project
This repository serves as a portfolio and archive for my Printed Circuit Board (PCB) designs developed using KiCad. It includes everything from initial schematic capture to 3D modeling and production-ready manufacturing files.
This repository serves as a portfolio and archive for my Printed Circuit Board (PCB) designs developed using KiCad. It includes everything from initial schematic capture to 3D modeling and production-ready manufacturing files.
1. Schematic Design: Defining connections and selecting components. 2. Footprint Assignment: Linking symbols to physical footprints. 3. Board Layout: Defining board edges, placing components, and routing traces. 4. Design Rule Check (DRC): Ensuring the board meets manufacturing constraints. 5. 3D Visualization: Verifying mechanical fit and component clearances.
Learn With Me bill of materials (BOM)
20 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X10_PIN Barrel_Jack_Switch | BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | GND1 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 9 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +1 |
| 4 | 1N4148 LED | LED_D5.0mm | D1, D2, D3, D4 |
| 1 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 200 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 200 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
Learn With Me design files
The KiCad project lives in the Abdelrahman-Elnahrawy/KiCad repository on GitHub; these links point at the commit this page was built from.
Learn With Me: common questions
How big is the Learn With Me PCB?
The Learn With Me measures 58.4 × 30.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Learn With Me?
20 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Learn With Me design files?
From the Abdelrahman-Elnahrawy/KiCad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Learn With Me design in my own project?
Yes, under the terms of its GPL-3.0 license, which Abdelrahman-Elnahrawy chose for the repository.