BeagleLogic
About the BeagleLogic PCB
BeagleLogic is an open source PCB design by abhishek-kakkar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 54.6 × 70.9 mm, with 21 components from 12 distinct parts.
Other key parts include the bbb, 74LVCH16245 and EEPROM. By type, the board carries 14 resistors, 3 ICs, 2 capacitors, 1 transistor and 1 connector.
It belongs with the test & measurement designs in this gallery.
From the project
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
NEW: The BeagleLogic cape is here! To get more information please click [here] (https://github.com/abhishek-kakkar/BeagleLogic/wiki/The-BeagleLogic-Cape).
Bootstrapped as a Google Summer of Code 2014 Project with BeagleBoard.org.
For detailed information and usage guide refer to the project wiki
BeagleLogic realizes a logic analyzer on the BeagleBone / the BeagleBone Black using the Programmable Real-Time units and matching firmware and Linux kernel modules on the BeagleBone Black.
Main components on the BeagleLogic
BeagleLogic bill of materials (BOM)
21 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | bbb | BBB | U1 |
| 1 | 74LVCH16245 | TSSOP-48_6.1x12.5mm_Pitch0.5mm | U2 |
| 1 | EEPROM | SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | CONN_02X14 | Pin_Header_Angled_2x14 | P1 |
| 2 | 0.1 uF | R_0603 | C1, C2 |
| 1 | 100K | R_0603 | R1 |
| 2 | 4K7 | R_0603 | R2, R3 |
| 7 | 10K | R_0603 | R4, R5, R6, R7, R10, R12, R13 |
| 2 | 0R | R_0603 | R8, R9 |
| 1 | 1K | R_0603 | R14 |
| 1 | 0R | R_0402 | R15 |
BeagleLogic design files
The KiCad project lives in the abhishek-kakkar/BeagleLogic repository on GitHub; these links point at the commit this page was built from.
BeagleLogic: common questions
How big is the BeagleLogic PCB?
The BeagleLogic measures 54.6 × 70.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BeagleLogic?
21 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the BeagleLogic design files?
From the abhishek-kakkar/BeagleLogic repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BeagleLogic design in my own project?
Yes, under the terms of its GPL-3.0 license, which abhishek-kakkar chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 Frontpanel a
88 × 25 mm23 parts2LGPL-3.0528