EleLab v2 Frontpanel a
About the EleLab v2 Frontpanel a PCB
EleLab v2 Frontpanel a is an open source PCB design by Chrismettal, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 88 × 25 mm, with 23 components from 9 distinct parts.
By type, the board carries 20 connectors and 2 fuses.
It belongs with the test & measurement, audio and power & battery designs in this gallery.
From the project
Cheap DIY lab system for hobbyists and the tinkering folk
- Buying - The concept - The PCBs - Bus100 / Bus150 - PowerFeed - Frontpanel\_a - The modules - Supplies - Supply from ATX/SFX - Supply from XT60/Barrel - Supply from Meanwell PSU - Supply from Bosch 18 V Battery - Lab PSU fixed - Lab PSU variable - Oscilloscope DSO138 - Resistor decade - Performance - Component tester - Raspberry Pi - Display - Electronic Load - Signal generator - Audio amplifier / signal tracer - TS100 Soldering station - Tips and tricks
EleLab v2 Frontpanel a bill of materials (BOM)
23 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x04 | PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal | J1, J2 |
| 2 | USB_A | USB_B_Standing | J3, J4 |
| 8 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J5, J6, J7, J8, J9, J10, J11, J12 |
| 2 | VBUS | PinHeader_1x01_P2.54mm_Vertical | J13, J17 |
| 2 | D+ | PinHeader_1x01_P2.54mm_Vertical | J14, J18 |
| 2 | D- | PinHeader_1x01_P2.54mm_Vertical | J15, J19 |
| 2 | GND | PinHeader_1x01_P2.54mm_Vertical | J16, J20 |
| 2 | 3A | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1, F2 |
| 1 | Binary_6_Logo | Binary_6_v0.1 | LO_1 |
EleLab v2 Frontpanel a design files
The KiCad project lives in the Chrismettal/EleLab_v2 repository on GitHub; these links point at the commit this page was built from.
EleLab v2 Frontpanel a: common questions
How big is the EleLab v2 Frontpanel a PCB?
The EleLab v2 Frontpanel a measures 88 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EleLab v2 Frontpanel a?
23 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the EleLab v2 Frontpanel a design files?
From the Chrismettal/EleLab_v2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EleLab v2 Frontpanel a design in my own project?
Yes, under the terms of its GPL-3.0 license, which Chrismettal chose for the repository.
More boards in EleLab_v2
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k