CarteMPP
About the CarteMPP PCB
CarteMPP is an open source STM32 PCB design by Achille-92, published on GitHub. It is a 2-layer board measuring 58 × 38 mm, with 31 components from 18 distinct parts.
Its main chip is the STM32F303K8T6, from the STM32 family. Other key parts include the MCP2562FDT-E/SN and AZ1117-3.3. By type, the board carries 15 connectors, 8 capacitors, 3 ICs, 2 jumpers, 2 resistors and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
Github pour les programmes du robot.
Main components on the CarteMPP
CarteMPP bill of materials (BOM)
31 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F303K8T6 | QFP80P900X900X160-32N | U1 |
| 1 | MCP2562FDT-E/SN | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | U2 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x08 | DIP-16_W7.62mm_Socket_LongPads | J1 |
| 6 | Autocom2 | Autocom2 | J2, J3, J4, J7, J8, J14 |
| 1 | Autocom4 | Autocom4 | J5 |
| 4 | Mounting_Screw_3mm | Mounting_Screw_3mm | J9, J10, J11, J12 |
| 1 | FTSH-105-01-L-DV-K | SAMTEC_FTSH-105-01-L-DV-K | J13 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | Herkulex | TE_292161-4 | J16 |
| 2 | 7-188275-8 Micromatch 8 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | JP1, JP2 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 5 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C6, C7 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | Cap | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 360 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
CarteMPP design files
The KiCad project lives in the Achille-92/CRAC2026 repository on GitHub; these links point at the commit this page was built from.
CarteMPP: common questions
What microcontroller does the CarteMPP use?
The CarteMPP is built around the STM32F303K8T6, from the STM32 family.
How big is the CarteMPP PCB?
The CarteMPP measures 58 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CarteMPP?
31 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the CarteMPP design files?
From the Achille-92/CRAC2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CarteMPP design in my own project?
The repository has no license, so all rights stay with Achille-92. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CarteMPP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in CRAC2026
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type g
169 × 30 mm24 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type c
188 × 30 mm17 parts2LApache-2.02.9k