9 open source boards using the MCP2562FDT-E/SN
Real designs built with the MCP2562FDT-E/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Tercio-B1
Kerol-Dev
46 × 46 mm139 parts6LApache-2.00Carte puissance crac
Darkzveller
67.1 × 123.5 mm51 parts2LNo license0ESP32
Kicad WIFI CAN YG YEK
Darkzveller
48 × 28 mm17 parts2LNo license0STM32
CarteMPP
Achille-92
58 × 38 mm31 parts2LNo license1Herkulex
Achille-92
68 × 68 mm20 parts2LNo license1Carte IHM
Darkzveller
105 × 72 mm20 parts2LNo license0Herkulex
Darkzveller
68 × 68 mm20 parts2LNo license0ESP32
WifiCAN
Darkzveller
48 × 28 mm17 parts2LNo license0ESP32
CarteMoteurs
Darkzveller
51.3 × 65 mm13 parts2LNo license0
The MCP2562FDT-E/SN in open source designs
The gallery holds 9 open source boards using the MCP2562FDT-E/SN from 4 GitHub repositories; a typical one measures about 58 × 65 mm and carries around 20 components.
89% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is CarteMPP by Achille-92.
Parts used alongside the MCP2562FDT-E/SN
What boards using the MCP2562FDT-E/SN are built for
MCP2562FDT-E/SN: common questions
Where can I find a MCP2562FDT-E/SN reference design?
Each of the 9 boards on this page is a real design using the MCP2562FDT-E/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP2562FDT-E/SN?
The ESP32-DEVKITC-32D, EVALSP820-XS and NUCLEO-F303K8 appear in the most repositories here.
Which microcontrollers do boards using the MCP2562FDT-E/SN use?
Most are built on ESP32 (3) and STM32 (2).
How big is a typical board using the MCP2562FDT-E/SN?
The median is 58 × 65 mm, and 89% are two-layer designs.
What is the most popular open source board using the MCP2562FDT-E/SN?
By GitHub stars, CarteMPP by Achille-92, with 1 stars.
Can I simulate one of these boards using the MCP2562FDT-E/SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.