PCB-Business-Card
About the PCB-Business-Card
PCB-Business-Card is an open source PCB design by ACW-Electronics, published on GitHub. It is a 2-layer board measuring 85.1 × 53.3 mm, with 5 components from 5 distinct parts.
Other key parts include the NT3H2111W0FHKH. By type, the board carries 1 IC, 1 LED, 1 inductor, 1 capacitor and 1 resistor.
From the project
Making an NFC PCB Business Card
NOTE FOR REVIEWER: I do not have firmware since this is going to be written for nfc via my phone. It will link to my personal website, andrewcwong.com, but there is no firmware I am writing. Also, the actual BOM is the one called PCB Busines Card-bom.csv. The other file was for JLCPCB. I'm doing PCBA since it'd be cheaper than buying the components individually and soldering them on. Also, sorry for the file dump, not sure what the autochecker was missing so I threw on a bunch of files till it worked
Main components on the PCB-Business-Card
PCB-Business-Card bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NT3H2111W0FHKH | QFN8P50_160X160X50L40X20N | U1 |
| 1 | KT-0805黄灯 17-21SUYC/TR8 KENTO | LED0805-R-RD | LED1 |
| 1 | 25X48MM_NFC_ANTENNA | 25X48MM_NFC_ANTENNA | L1 |
| 1 | 220NF 220nF | C_0603_1608Metric | C1 |
| 1 | 47 | R_0603_1608Metric | R1 |
PCB-Business-Card design files
The KiCad project lives in the ACW-Electronics/PCB-Business-Card repository on GitHub; these links point at the commit this page was built from.
- LayoutBusinessCard.kicad_pcb
- SchematicBusinessCard.kicad_sch
- BOMbom.csv
PCB-Business-Card: common questions
How big is the PCB-Business-Card?
The PCB-Business-Card measures 85.1 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-Business-Card?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB-Business-Card design files?
From the ACW-Electronics/PCB-Business-Card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCB-Business-Card design in my own project?
The repository has no license, so all rights stay with ACW-Electronics. Use it as a reference, and ask the author before reusing the design.