29 open source boards using the NT3H2111W0FHKH
Real designs built with the NT3H2111W0FHKH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Cybercard
notaroomba
88.9 × 50.8 mm5 parts2LNo license15NFC-card
dragonruler1000
85.6 × 54 mm4 parts2LCERN-OHL-P-2.02RP2040/RP2350
Chess Card
Hung-Chi970104
55 × 85 mm68 parts2LNo license1ESP32
PCB-Business-Card
Studented0
100 × 75 mm20 parts2LMIT1PCB-Business-Card
ACW-Electronics
85.1 × 53.3 mm5 parts2LNo license1BusinessCard
JudasLilith
85.6 × 54 mm5 parts2LNo license1Pixel-Badge
zgeez
118 × 76 mm1202 parts4LMIT0RP2040/RP2350
Tic tac toe business card
Hung-Chi970104
85 × 55 mm77 parts2LNo license0ESP32
Photo frame hardware
Benv-B
80 × 60 mm62 parts2LCERN-OHL-P-2.00ESP32
Digital-B-Card
AhmedMKAlzoubi
100 × 60 mm62 parts2LNo license0ESP32
Intellikeep
TannerNelson16
30 × 30 mm45 parts2LNo license0WCH CH32/CH55x
Usb pd card
ulyssecrn
85.6 × 54 mm42 parts2LNo license0AVR/Arduino
Nfc card
nastea1
85.5 × 54.1 mm39 parts2LCustom license0STM32
Business-Card
TomasD-git
105.9 × 61.4 mm36 parts2LNo license0Curiosity s-Card
mat808ofc
90 × 60 mm12 parts2LNo license0NFC
Erox-02
72.6 × 46.1 mm8 parts2LGPL-3.00PCB Business Card
AmirAlsad
88.9 × 50.8 mm6 parts2LMIT0Badge-NFC HW
climaCAL
35 × 38.2 mm5 parts2LNo license0NFC Key chain
Az154za
50 × 25 mm5 parts2LNo license0Fallout-NFC-Badge
NoseFa
92 × 51 mm5 parts2LNo license0NFC-Card
RR-CREATOR
86 × 54 mm5 parts2LMIT0Eva
Shadow220108
0 × 0 mm5 parts2LNo license0Info card
udu3324
85.6 × 54 mm5 parts2LGPL-3.00NFC-COKE
Axe-1st
119.4 × 65.6 mm4 parts2LNo license0RulerX
Vasipallie
206 × 25 mm4 parts2LNo license0V-Card
HEofOttoman
89.3 × 50.8 mm3 parts2LNo license0PCB-Business-Card
VioletTides
85.6 × 54 mm2 parts2LNo license0Nfc business card
manji-0
89 × 51 mm1 parts2LNo license0NFC-Card
Pegoku
46 × 37 mm5 parts2LNo license1
How designs wire the NT3H2111W0FHKH
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the NT3H2111W0FHKH connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a series resistor on 18 of 28 designs, most often 47 Ω (then 1 kΩ).
- The FD pin is left unconnected on 21 of 28 designs (a signal on 7).
- The VCC pin has a series resistor on 17 of 28 designs, most often 47 Ω (then 1 kΩ).
- The SCL pin is left unconnected on 19 of 28 designs (a signal on 9).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LApin 1 | Connected to: Signal 93% |
|
| VSSpin 2 | Connected to: Signal 54% · GND 46% |
|
| SCLpin 3 | Connected to: Not connected 68% · a signal 32% | — |
| FDpin 4 | Connected to: Not connected 75% · a signal 25% | — |
| SDApin 5 | Connected to: Not connected 68% · a signal 32% | — |
| VCCpin 6 | Connected to: Signal 64% · 3.3V 25% |
|
| VOUTpin 7 | Connected to: Signal 79% |
|
| LBpin 8 | Connected to: Signal 93% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cybercard by notaroomba, NFC-card by dragonruler1000, PCB-Business-Card by ACW-Electronics and Chess Card by Hung-Chi970104.
The NT3H2111W0FHKH in open source designs
The gallery holds 29 open source boards using the NT3H2111W0FHKH from 29 GitHub repositories; a typical one measures about 85.6 × 54 mm and carries around 5 components.
97% are two-layer designs, the rest use four layers or more, and 28% carry an open source license.
The most starred is Cybercard by notaroomba.
Parts used alongside the NT3H2111W0FHKH
Microcontrollers on boards using the NT3H2111W0FHKH
What boards using the NT3H2111W0FHKH are built for
NT3H2111W0FHKH: common questions
Where can I find a NT3H2111W0FHKH reference design?
Each of the 29 boards on this page is a real design using the NT3H2111W0FHKH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the NT3H2111W0FHKH VOUT pin?
The VOUT pin has a series resistor on 18 of 28 designs, most often 47 Ω (then 1 kΩ). Counted from the KiCad layouts of 28 open source designs using the NT3H2111W0FHKH.
How is the NT3H2111W0FHKH FD pin connected?
The FD pin is left unconnected on 21 of 28 designs (a signal on 7). Counted from the KiCad layouts of 28 open source designs using the NT3H2111W0FHKH.
What resistor goes on the NT3H2111W0FHKH VCC pin?
The VCC pin has a series resistor on 17 of 28 designs, most often 47 Ω (then 1 kΩ). Counted from the KiCad layouts of 28 open source designs using the NT3H2111W0FHKH.
What parts are used alongside the NT3H2111W0FHKH?
The AP2112K-3.3, RP2040 and TPS61023DRLR appear in the most repositories here.
Which microcontrollers do boards using the NT3H2111W0FHKH use?
Most are built on ESP32 (4), RP2040/RP2350 (2), AVR/Arduino (1) and WCH CH32/CH55x (1).
How big is a typical board using the NT3H2111W0FHKH?
The median is 85.6 × 54 mm, and 97% are two-layer designs.
What is the most popular open source board using the NT3H2111W0FHKH?
By GitHub stars, Cybercard by notaroomba, with 15 stars.
Can I simulate one of these boards using the NT3H2111W0FHKH before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.