LocoNet Interface
About the LocoNet Interface PCB
LocoNet Interface is an open source PCB design by acwright, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 26 components from 19 distinct parts.
Other key parts include the LM393. By type, the board carries 12 resistors, 5 connectors, 4 diodes, 3 transistors, 1 IC and 1 capacitor.
From the project
Project files for Wright Train Works
Main components on the LocoNet Interface
LocoNet Interface bill of materials (BOM)
26 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 3 | MMBT2222A 1P | SOT-23 | Q1, Q2, Q3 |
| 1 | 12V | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
| 2 | RJ12 | RJ12_Amphenol_54601 | J2, J3 |
| 1 | LocoNet Termination | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | LocoNet Interface | PinHeader_1x04_P2.54mm_Horizontal | J5 |
| 1 | PWR | LED_0603_1608Metric | D1 |
| 2 | 1N5819WS | D_SOD-323 | D2, D3 |
| 1 | RX/TX | LED_0603_1608Metric | D4 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 2 | 4.7K | R_0603_1608Metric | R1, R5 |
| 2 | 47 | R_0603_1608Metric | R2, R3 |
| 1 | 47K | R_0603_1608Metric | R4 |
| 2 | 1K | R_0603_1608Metric | R6, R11 |
| 1 | 150K | R_0603_1608Metric | R7 |
| 1 | 27K | R_0603_1608Metric | R8 |
| 1 | 39K | R_0603_1608Metric | R9 |
| 1 | 240K | R_0603_1608Metric | R10 |
| 1 | 470 | R_0603_1608Metric | R12 |
LocoNet Interface design files
The KiCad project lives in the acwright/Wright-Train-Works repository on GitHub; these links point at the commit this page was built from.
LocoNet Interface: common questions
How big is the LocoNet Interface PCB?
The LocoNet Interface measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LocoNet Interface?
26 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the LocoNet Interface design files?
From the acwright/Wright-Train-Works repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LocoNet Interface design in my own project?
Yes, under the terms of its MIT license, which acwright chose for the repository.
More boards in Wright-Train-Works
AVR/ArduinoLocoNet Shield
55 × 55 mm26 parts2LMIT1
DCC Decoder
50 × 50 mm25 parts2LMIT1
AVR/ArduinoDCC Decoder Shield
55 × 55 mm19 parts2LMIT1
Tortoise Control Board RJ-45
50 × 50 mm12 parts2LMIT1
Tortoise Hub Board
75 × 75 mm8 parts2LMIT1
Tortoise Breakout RJ-45
50 × 50 mm4 parts2LMIT1