Eausure v1
adam-dev-hub·eausure-v1·EauSure_PCB/source/eausure-measurement-node.kicad_pcb
About the Eausure v1 PCB
Eausure v1 is an open source PCB design by adam-dev-hub, published on GitHub. It is a 2-layer board measuring 190 × 95 mm, with 38 components from 19 distinct parts.
By type, the board carries 9 capacitors and 1 resistor.
It belongs with the rf & radio, iot & wireless and test & measurement designs in this gallery.
From the project
Complete IoT water quality monitoring ecosystem spanning embedded firmware, LoRa gateways, cloud APIs, mobile/web supervision, and PCB/mechanical design. Features real-time data collection, secure communication, and remote firmware updates.
Travail de conception PCB du nœud de mesure de la solution EauSûre.
Ce dossier contient : - les sources KiCad du circuit principal ; - une version inoptimisée du schéma ; - une version simplifiée du schéma ; - les exports visuels du schéma et du PCB ; - un backup de fabrication avec gerbers et perçages.
Ce dépôt documente la carte électronique du nœud de mesure EauSûre, support matériel utilisé pour : - acquérir les paramètres physico-chimiques de l'eau : pH, TDS, turbidité et température ; - embarquer l'unité de calcul ESP32-S3 chargée du traitement local et de la coordination des…

Eausure v1 bill of materials (BOM)
38 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA219 | PinSocket_1x06_P2.54mm_Vertical | Batt_Lvl1 |
| 1 | 220uF | CP_Radial_D5.0mm_P2.50mm | Booster_Bulk1 |
| 3 | 100nF | C_Rect_L7.2mm_W2.5mm_P5.00mm | C_Filter1, C_Filter2, C_Filter3 |
| 1 | BC547 | TO-92_Inline | Controle_BS250 |
| 1 | BS250 | TO-92_Inline | Controle_booster1 |
| 1 | A/D DIO2 | PinHeader_1x02_P2.54mm_Vertical | DIO2 |
| 3 | ESD_Safe | D_DO-35_SOD27_P7.62mm_Horizontal | D_Zener1, D_Zener2, D_Zener3 |
| 1 | MPU6050 | PinSocket_1x08_P2.54mm_Vertical | GY-521 |
| 2 | 22_PIN | PinSocket_1x22_P2.54mm_Vertical | J_Left_ESP32, J_Right_ESP32 |
| 2 | 8_PIN | PinSocket_1x08_P2.54mm_Vertical | Lora_L1, Lora_R1 |
| 2 | 10Kohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_Bas1, R_Bas2 |
| 3 | 4.7Kohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_Filter1, R_Filter2, R_Filter3 |
| 2 | 15Kohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_Haut1, R_Haut2 |
| 2 | 100kohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_PD_BASE1, R_PU_PMOS1 |
| 2 | 47ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_SCL1, R_SDA1 |
| 1 | SEN0244 | PinSocket_1x03_P2.54mm_Vertical | TDS1 |
| 7 | 100nF | C_Rect_L7.2mm_W2.5mm_P5.00mm | C1, C2, C4, C5, C7, C9, C10 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C8, C11 |
| 1 | MCP1700 | TO-92_Inline | Régulateur_3.3V |
Eausure v1 design files
The KiCad project lives in the adam-dev-hub/eausure-v1 repository on GitHub; these links point at the commit this page was built from.
Eausure v1: common questions
How big is the Eausure v1 PCB?
The Eausure v1 measures 190 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eausure v1?
38 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Eausure v1 design files?
From the adam-dev-hub/eausure-v1 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Eausure v1 design in my own project?
The repository has no license, so all rights stay with adam-dev-hub. Use it as a reference, and ask the author before reusing the design.
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kRadioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675