HardLabs

Radioberry juice

pa3gsb·Radioberry-2.x·hardware/juice/radioberry-juice.kicad_pcb

Radioberry juice PCB layout, top view — open source board by pa3gsb

About the Radioberry juice PCB

Radioberry juice is an open source PCB design by pa3gsb, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 87 components from 46 distinct parts.

Other key parts include the LD1117S33TR, FT2232HL and 93LC56B. By type, the board carries 37 capacitors, 22 resistors, 10 connectors, 5 diodes, 4 ICs and 4 inductors.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

Ham Radio hat for Raspberry PI

RadioBerry V2.0 - Ham radio cape for Raspberry PI ==============================================

- Building a HAM Radio - Learning (from noob to guru)

WIKI FOR MORE DETAILS: https://github.com/pa3gsb/Radioberry-2.x/wiki

- Raspberry PI - Radio extension board (cape) - using AD9866 (12 bit) for RX and TX modes.

Radioberry is designed to run on Raspberry Pi hardware and is licensed to use the official “Powered by Raspberry Pi” logo.

Radioberry juice, from the project README
From the project README

Main components on the Radioberry juice

LD1117S33TRFT2232HL93LC56B

Radioberry juice bill of materials (BOM)

87 components, 46 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
LD1117S33TR
U2, U5
1
FT2232HL
U3
1
93LC56B
U4
1
DMP3099L
Q1
1
12MHz
Y1
1
PS
CN1
1
OPEN
J1
1
TYPE-C-31-M-12
J2
2
JNO
J3, J4
1
2x20
J5
1
MH1
J6
1
MH2
J7
1
MH3
J8
1
MH4
J9
1
IO10
DB1
1
3A@20V
F1
1
LMZ22005TZ_NOPB
VR1
1
SMBJ18CA
D1
2
LED
D2, D5
2
PGB1010603
D3, D4
Show 26 more
QtyPartRefs
4
600R
FB1, FB2, FB3, FB4
3
10uF
C1, C3, C35
3
100nF
C2, C7, C37
2
100uF
C4, C36
1
0.47uF
C5
1
47uF
C6
7
4.7uF
C8, C11, C15, C27, C29, C31, C33
12
100nF
C9, C12, C16, C17, C20, C23, C24, C25 +4
1
3.3uF
C10
2
1nF
C13, C22
3
10nF
C14, C21, C26
2
18pF
C18, C19
1
620
R1
1
1.5K
R2
2
1K
R3, R20
2
5.1K
R4, R5
2
10
R6, R7
1
12K 1%
R8
1
27
R9
4
10K
R10, R12, R13, R14
1
1M
R11
1
2.2K
R15
1
4K7
R16
3
4.7K
R17, R18, R19
1
3.3K
R21
1
47
R22

Radioberry juice design files

The KiCad project lives in the pa3gsb/Radioberry-2.x repository on GitHub; these links point at the commit this page was built from.

Radioberry juice: common questions

How big is the Radioberry juice PCB?

The Radioberry juice measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Radioberry juice?

87 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Radioberry juice design files?

From the pa3gsb/Radioberry-2.x repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Radioberry juice design in my own project?

The repository has no license, so all rights stay with pa3gsb. Use it as a reference, and ask the author before reusing the design.

More boards in Radioberry-2.x

Similar boards