Isa flash disk
adsdevdoo·isa-flash-disk·hardware/kicad/isa-flash-disk.kicad_pcb
About the Isa flash disk PCB
Isa flash disk is an open source PCB design by adsdevdoo, published on GitHub under the MIT license. It is a 2-layer board measuring 104.1 × 100 mm, with 40 components from 23 distinct parts.
Other key parts include the PA28F008SA-85 / -120 (salvaged), CD74HCT688M96, SN74HCT138DR, SN74HCT273DWR and CD74HCT175M96. By type, the board carries 16 capacitors, 10 ICs, 7 resistors, 2 transistors, 2 switches and 2 diodes.
From the project
Проект для KiCad 9.0.2 или новее: открыть isa-flash-disk.kicadpro`.
Проект для KiCad 9.0.2 или новее: открыть isa-flash-disk.kicadpro`.
Статус: схема и плата rev A: ERC 0, DRC 0, соответствие схеме и плате без расхождений. В железе не проверялось. PDF схемы — docs/schematic.pdf, заказ — docs/manufacturing.md.
Генератор соединяет выводы короткими проводниками с метками цепей, поэтому схема читается как таблица соединений. Дальше её можно править в KiCad. Генератор не перезапишет схему, изменённую вручную (сверяет SHA-256 с .generated.sha256); --force отбрасывает ручные правки.
Main components on the Isa flash disk
Isa flash disk bill of materials (BOM)
40 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PA28F008SA-85 / -120 (salvaged) PA28F008SA | Intel_PSOP-44_P1.27mm | U1, U2 |
| 2 | CD74HCT688M96 74HCT688 | SOIC-20W_7.5x12.8mm_P1.27mm | U3, U4 |
| 1 | SN74HCT138DR 74HCT138 | SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | SN74HCT273DWR 74HCT273 | SOIC-20W_7.5x12.8mm_P1.27mm | U6 |
| 1 | CD74HCT175M96 74HCT175 | SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | SN74LS245DWR 74LS245 | SOIC-20W_7.5x12.8mm_P1.27mm | U8 |
| 1 | SN74HCT32DR 74HCT32 | SOIC-14_3.9x8.7mm_P1.27mm | U9 |
| 1 | SN74HCT04DR 74HCT04 | SOIC-14_3.9x8.7mm_P1.27mm | U10 |
| 1 | AO3407A | SOT-23 | Q1 |
| 1 | 2N7002LT1G 2N7002L | SOT-23 | Q2 |
| 1 | WRITE | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | MEM SA13..SA17 | SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW1 |
| 1 | IO SA3..SA8 | SW_DIP_SPSTx06_Slide_9.78x17.42mm_W7.62mm_P2.54mm | SW2 |
| 1 | GREEN ACT | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | RED VPP | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 14 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 1uF 25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 2 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1.5K 1.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 2 | 6x10k bussed | R_Array_SIP7 | RN1, RN2 |
Isa flash disk design files
The KiCad project lives in the adsdevdoo/isa-flash-disk repository on GitHub; these links point at the commit this page was built from.
Isa flash disk: common questions
How big is the Isa flash disk PCB?
The Isa flash disk measures 104.1 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Isa flash disk?
40 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Isa flash disk design files?
From the adsdevdoo/isa-flash-disk repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Isa flash disk design in my own project?
Yes, under the terms of its MIT license, which adsdevdoo chose for the repository.