5 open source boards using the SN74HCT04DR
Real designs built with the SN74HCT04DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Anthracite PCB (Bottom)
trope-oshw
60 × 73.5 mm208 parts4LCERN-OHL-S-2.06ESP32
VERA MODULE A2
gianlucarenzi
177.8 × 77.3 mm181 parts2LGPL-3.00ESP32
Vera-Module-RBL-C64
gianlucarenzi
143 × 162.5 mm175 parts2LGPL-3.00ESP32
Vera-Module-RBL-XE
gianlucarenzi
143 × 162.5 mm175 parts2LGPL-3.00Isa flash disk
adsdevdoo
104.1 × 100 mm40 parts2LMIT0
How designs wire the SN74HCT04DR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74HCT04DR connects to, and the resistors, capacitors and other passives placed on it.
- Pin 12 is left unconnected on 5 of 5 designs.
- Pin 6 is left unconnected on 4 of 5 designs.
- Pin 8 is left unconnected on 4 of 5 designs.
- Pin 10 is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 74LVC4245APW_118 60%, a connector 40% |
|
| Pin 6 | Connected to: Not connected 80% · a signal 20% | — |
| GND_7pin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 11 | Connected to: Not connected 60% · GND 40% | — |
| Pin 12 | Connected to: Not connected 100% | — |
| VCC_14pin 14 | Connected to: 5V 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Anthracite PCB (Bottom) by trope-oshw, Isa flash disk by adsdevdoo, VERA MODULE A2 by gianlucarenzi and Vera-Module-RBL-C64 by gianlucarenzi.
The SN74HCT04DR in open source designs
The gallery holds 5 open source boards using the SN74HCT04DR from 5 GitHub repositories; a typical one measures about 143 × 100 mm and carries around 175 components.
80% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Anthracite PCB (Bottom) by trope-oshw.
Parts used alongside the SN74HCT04DR
What boards using the SN74HCT04DR are built for
SN74HCT04DR: common questions
Where can I find a SN74HCT04DR reference design?
Each of the 5 boards on this page is a real design using the SN74HCT04DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74HCT04DR pin 12 connected?
Pin 12 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HCT04DR.
How is the SN74HCT04DR pin 6 connected?
Pin 6 is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HCT04DR.
How is the SN74HCT04DR pin 8 connected?
Pin 8 is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74HCT04DR.
What parts are used alongside the SN74HCT04DR?
The 74LVC4245APW_118, AMS1117-1.2, AMS1117-3.3, CD4011B and ESP32-S3FN8 appear in the most repositories here.
Which microcontrollers do boards using the SN74HCT04DR use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the SN74HCT04DR?
The median is 143 × 100 mm, and 80% are two-layer designs.
What is the most popular open source board using the SN74HCT04DR?
By GitHub stars, Anthracite PCB (Bottom) by trope-oshw, with 6 stars.
Can I simulate one of these boards using the SN74HCT04DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.