HardLabs

Programmer routed1

afbravo·ic_programmer

Programmer routed1 PCB layout, top view — open source STM32 board by afbravo
Simulate this board

About the Programmer routed1 PCB

Programmer routed1 is an open source STM32 PCB design by afbravo, published on GitHub. It is a 4-layer board measuring 86 × 59 mm, with 49 components from 21 distinct parts.

Its main chip is the STM32F103RBT6, from the STM32 family. Other key parts include the TPMIC5504-3.3YM5 and TXS0108EPW. By type, the board carries 21 capacitors, 10 resistors, 6 ICs, 5 diodes, 3 connectors and 3 switches.

It belongs with the usb & debug tools designs in this gallery.

From the project

32 pin ic programmer

Main components on the Programmer routed1

TPMIC5504-3.3YM5STM32F103RBT6TXS0108EPW

Programmer routed1 bill of materials (BOM)

49 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPMIC5504-3.3YM5
U1
1
STM32F103RBT6
U2
4
TXS0108EPW
U3, U4, U5, U6
1
8MHz
Y1
1
SWJ-DP
J1
1
USB_B_Micro
J2
1
ZIF 32 DIP Socket
J3
1
Boot0
SW1
1
Reset
SW2
1
Boot1
SW3
1
WHITE
D1
1
YELLOW
D2
1
RED
D3
1
GREEN
D4
1
BLUE
D5
4
1uF
C1, C4, C5, C13
2
30p
C2, C3
15
100nF
C6, C7, C8, C9, C10, C11, C12, C14 +7
2
220
R1, R2
3
100
R3, R7, R8
Show 1 more
QtyPartRefs
5
10k
R4, R5, R6, R9, R10

Programmer routed1 design files

The KiCad project lives in the afbravo/ic_programmer repository on GitHub; these links point at the commit this page was built from.

Programmer routed1: common questions

What microcontroller does the Programmer routed1 use?

The Programmer routed1 is built around the STM32F103RBT6, from the STM32 family.

How big is the Programmer routed1 PCB?

The Programmer routed1 measures 86 × 59 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Programmer routed1?

49 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Programmer routed1 design files?

From the afbravo/ic_programmer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Programmer routed1 design in my own project?

The repository has no license, so all rights stay with afbravo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Programmer routed1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ic_programmer

Similar boards