8 open source boards using the STM32F103RBT6
Real designs built with the STM32F103RBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
MG ZS V2
damienmaguire
180 × 120 mm161 parts4LGPL-3.016STM32
Openinverter hw mainboard mini
llange
56.8 × 67.3 mm96 parts2LCC-BY-SA-4.03STM32
VVVF-Invertor-Controller
adirock09
56.8 × 67.3 mm96 parts2LNo license0STM32
VVVF-Invertor--Controller
Shubhkr08
56.8 × 67.3 mm96 parts2LNo license0STM32
Stm32 balancingRobot
JwAhn0830
100 × 50 mm64 parts4LNo license0STM32
Programmer
afbravo
72 × 59 mm49 parts4LNo license0- schematic only · 98 partsSTM32
Shu poyo
shu-13
98 partsMIT0 STM32
Programmer routed1
afbravo
86 × 59 mm49 parts4LNo license0
How designs wire the STM32F103RBT6
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F103RBT6 connects to, and the resistors, capacitors and other passives placed on it.
- The PD0/OSC<= pin has a capacitor to GND on 6 of 6 designs, most often 20 pF (then 30 pF).
- The PD1/OSC=> pin has a capacitor to GND on 5 of 6 designs, most often 20 pF (then 30 pF).
- The NRST pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 100 nF).
- The VBAT pin has a decoupling capacitor on 4 of 6 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: VCCIO 83% · a signal 17% |
|
| PC13pin 2 | Connected to: Signal 83% · GND 17% |
|
| PC14pin 3 | Connected to: Not connected 67% · a signal 33% | — |
| PC15pin 4 | Connected to: Not connected 67% · a signal 33% | — |
| PD0/OSC<=pin 5 | Connected to: Signal 83% · 5V 17% |
|
| PD1/OSC=>pin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 100% |
|
| PC0pin 8 | Connected to: Signal 80% · not connected 20% |
|
| PC1pin 9 | Connected to: Signal 80% · not connected 20% |
|
| PC2pin 10 | Connected to: Signal 80% · not connected 20% |
|
| PC3pin 11 | Connected to: Signal 80% · not connected 20% |
|
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: Signal 60% · 3.3V 40% |
|
| PA0pin 14 | Connected to: Not connected 80% · a signal 20% | — |
| PA1pin 15 | Connected to: LM2901 60%, NC7SZ10P6X 60% |
|
| PA2pin 16 | Connected to: Signal 100% |
|
| PA3pin 17 | Connected to: Signal 100% |
|
| VSS_4pin 18 | Connected to: GND 100% | — |
| VDD_4pin 19 | Connected to: VCCIO 100% |
|
| PA4pin 20 | Connected to: Signal 80% · not connected 20% |
|
| PA5pin 21 | Connected to: LM2901 60% |
|
| PA6pin 22 | Connected to: Signal 100% |
|
| PA7pin 23 | Connected to: Signal 100% |
|
| PC4pin 24 | Connected to: Signal 80% · not connected 20% |
|
| PC5pin 25 | Connected to: Signal 80% · not connected 20% |
|
| PB0pin 26 | Connected to: LM2901 60% · not connected 20% |
|
| PB1pin 27 | Connected to: Signal 80% · not connected 20% |
|
| PB2pin 28 | Connected to: Not connected 60% · a signal 40% |
|
| VSS_1pin 31 | Connected to: GND 100% | — |
| VDD_1pin 32 | Connected to: VCCIO 100% |
|
| PC6pin 37 | Connected to: Signal 100% |
|
| PC7pin 38 | Connected to: NC7SZ10P6X 60% |
|
| PC8pin 39 | Connected to: Signal 100% |
|
| PC9pin 40 | Connected to: NC7SZ10P6X 60% |
|
| VSS_2pin 47 | Connected to: GND 100% | — |
| VDD_2pin 48 | Connected to: VCCIO 100% |
|
| PA15pin 50 | Connected to: Not connected 80% · a signal 20% | — |
| PC10pin 51 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
| PC11pin 52 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
| PD2pin 54 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MG ZS V2 by damienmaguire, Openinverter hw mainboard mini by llange, VVVF-Invertor-Controller by adirock09 and Programmer by afbravo.
The STM32F103RBT6 in open source designs
The gallery holds 8 open source boards using the STM32F103RBT6 from 7 GitHub repositories; a typical one measures about 72 × 67.3 mm and carries around 96 components.
57% use four copper layers or more, and 38% carry an open source license.
The most starred is MG ZS V2 by damienmaguire.
Parts used alongside the STM32F103RBT6
What boards using the STM32F103RBT6 are built for
STM32F103RBT6: common questions
Where can I find a STM32F103RBT6 reference design?
Each of the 8 boards on this page is a real design using the STM32F103RBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F103RBT6 PD0/OSC<= pin connected?
The PD0/OSC<= pin has a capacitor to GND on 6 of 6 designs, most often 20 pF (then 30 pF). Counted from the KiCad layouts of 6 open source designs using the STM32F103RBT6.
How is the STM32F103RBT6 PD1/OSC=> pin connected?
The PD1/OSC=> pin has a capacitor to GND on 5 of 6 designs, most often 20 pF (then 30 pF). Counted from the KiCad layouts of 6 open source designs using the STM32F103RBT6.
How is the STM32F103RBT6 NRST pin connected?
The NRST pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the STM32F103RBT6.
What parts are used alongside the STM32F103RBT6?
The LM2901, SN65HVD230, NC7SZ10P6X, RT8259GE and TDA2822D appear in the most repositories here.
Which microcontrollers do boards using the STM32F103RBT6 use?
Most are built on STM32 (7) and ESP8266 (1).
How big is a typical board using the STM32F103RBT6?
The median is 72 × 67.3 mm, and 43% are two-layer designs.
What is the most popular open source board using the STM32F103RBT6?
By GitHub stars, MG ZS V2 by damienmaguire, with 16 stars.
Can I simulate one of these boards using the STM32F103RBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.