USB ARMORY
About the USB ARMORY PCB
USB ARMORY is an open source PCB design by ahmad-ih, published on GitHub. It is a board measuring 54.6 × 19.6 mm, with 180 components from 50 distinct parts.
Other key parts include the MC34PF1510A6EP, MX6UL-VM, EMMC16G, A71CH and FPF2286UCX. By type, the board carries 101 capacitors, 45 resistors, 21 ICs, 4 diodes, 3 connectors and 3 inductors.
From the project
USB armory | https://github.com/inversepath/usbarmory Copyright (c) F-Secure Corporation
USB armory | https://github.com/inversepath/usbarmory Copyright (c) F-Secure Corporation
The USB armory from F-Secure Foundry is an open source hardware design, implementing a flash drive sized computer.
This repository is aimed towards developers, if you wish to purchase a USB armory board please see the USB armory project page.
Revision information ====================
Main components on the USB ARMORY
USB ARMORY bill of materials (BOM)
180 components, 50 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC34PF1510A6EP | SOT1369-4 | U1 |
| 1 | MX6UL-VM | SOT1534-2 | U2 |
| 1 | EMMC16G | FBGA-153 | U3 |
| 1 | A71CH | SOT1999-1 | U4 |
| 1 | FPF2286UCX | WLCSP-6 | U5 |
| 2 | TPD4E05U06-Q1 | DQA-USON-10 | U6, U7 |
| 1 | NX5P3090 | SOT1390-5 | U8 |
| 1 | FUSB303 | RWB-QFN-12 | U9 |
| 1 | MT41K256M16 | MICRON-FBGA-96 | U10 |
| 1 | ANNA-B112 | ANNA-B112 | U11 |
| 1 | TPD6F003 | WSON-12 | U12 |
| 1 | ATECC608A | UDFN-8 | U13 |
| 1 | TUSB320 | RWB-QFN-12 | U14 |
| 4 | TPD1E10B06 | X1SON-2 | U15, U16, U20, U21 |
| 1 | SN74LVC1G04 | X2SON-4 | U17 |
| 1 | FSA1208 | MLP-20 | U18 |
| 1 | TPD8E003 | WSON-8 | U19 |
| 1 | 24MHz | TSX-3225 | Y1 |
| 1 | 32.768kHz | CM7V-T1A | Y2 |
| 1 | microSD slot | MOLEX_503182-1852 | J1 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBC-PLUG | WURTH_632712000011 | J2 |
| 1 | USBC-RECEPTACLE | MOLEX_105450-0101 | J3 |
| 1 | CAS-220TA | CAS-220-A | SW1 |
| 1 | WHITE | SM0603_LED | D1 |
| 1 | BLUE | SM0603_LED | D2 |
| 2 | NSR20F30NXT5G | DSN2 | D3, D4 |
| 3 | 1uH | SM0603 | L1, L2, L3 |
| 7 | 4.7uF | SM0402 | C1, C2, C3, C23, C36, C85, C88 |
| 10 | 1uF | SM0201 | C4, C8, C9, C10, C14, C15, C25, C38 +2 |
| 18 | 0.1uF | SM0201 | C5, C6, C7, C11, C12, C19, C35, C39 +10 |
| 1 | 2.2uF | SM0402 | C13 |
| 1 | 47uF | SM0603 | C16 |
| 12 | 10uF | SM0402 | C17, C18, C20, C21, C22, C24, C26, C45 +4 |
| 1 | 0.47uF | SM0201 | C27 |
| 2 | 16pF | SM0201 | C28, C29 |
| 2 | 18pF | SM0201 | C30, C31 |
| 38 | 0.22uF | SM0201 | C33, C34, C37, C46, C47, C48, C55, C59 +30 |
| 4 | 4.7uF | SM0603 | C51, C54, C110, C111 |
| 5 | 22uF | SM0402 | C57, C77, C87, C98, C103 |
| 5 | 100K | SM0201 | R1, R2, R22, R32, R33 |
| 28 | 10K | SM0201 | R3, R4, R6, R7, R8, R9, R10, R11 +20 |
| 1 | 2.2M | SM0201 | R5 |
| 2 | 22R | SM0201 | R16, R54 |
| 2 | 4.7K | SM0201 | R17, R18 |
| 1 | 698R | SM0201 | R19 |
| 1 | 91R | SM0201 | R20 |
| 1 | 1M | SM0201 | R34 |
| 2 | 240R | SM0201 | R51, R53 |
| 1 | 470R | SM0201 | R52 |
| 1 | 33K | SM0201 | R59 |
USB ARMORY design files
The KiCad project lives in the ahmad-ih/USB-Armory repository on GitHub; these links point at the commit this page was built from.
USB ARMORY: common questions
How big is the USB ARMORY PCB?
The USB ARMORY measures 54.6 × 19.6 mm and is 0.8 mm thick.
How many components are on the USB ARMORY?
180 components, from 50 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB ARMORY design files?
From the ahmad-ih/USB-Armory repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the USB ARMORY design in my own project?
The repository has no license, so all rights stay with ahmad-ih. Use it as a reference, and ask the author before reusing the design.
