6 open source boards using the TUSB320
Real designs built with the TUSB320, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
USB armory Mk II
usbarmory
55.6 × 19.6 mm180 partsNo license1.5kMicrochip SAM
WT-220 RPi Hat and Rear IO
tuna-f1sh
173.5 × 85 mm152 parts2LGPL-3.04Nordic nRF
Unwired
NoxAevi
29.4 × 61.1 mm83 parts2LGPL-3.01USB ARMORY
ahmad-ih
54.6 × 19.6 mm180 partsNo license0RP2040/RP2350
Keyboard leds
modern-hobbyist
87.7 × 51.5 mm55 parts2LNo license0Core power
zeerolux
28.6 × 34.7 mm20 parts2LNo license1
How designs wire the TUSB320
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TUSB320 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF).
- The ID pin is left unconnected on 5 of 6 designs.
- The VBUS_DET pin has a series resistor on 3 of 6 designs, most often 1 MΩ.
- The SDA/OUT1 pin has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBUS_DETpin 4 | Connected to: Signal 83% · VBUS_LED_SAFE 17% |
|
| ADDRpin 5 | Connected to: Signal 67% · GND 33% |
|
| INT/OUT3pin 6 | Connected to: MX6UL-VM 33%, the microcontroller 33% · not connected 33% |
|
| SDA/OUT1pin 7 | Connected to: FUSB303 33% |
|
| SCL/OUT2pin 8 | Connected to: FUSB303 33% |
|
| IDpin 9 | Connected to: Not connected 83% · a signal 17% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| VDDpin 12 | Connected to: EMMC16G 33% · not connected 17% · VCC 33% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include USB armory Mk II by usbarmory, WT-220 RPi Hat and Rear IO by tuna-f1sh, Unwired by NoxAevi and Core power by zeerolux.
The TUSB320 in open source designs
The gallery holds 6 open source boards using the TUSB320 from 6 GitHub repositories; a typical one measures about 55.1 × 43.1 mm and carries around 118 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is USB armory Mk II by usbarmory.
Parts used alongside the TUSB320
Microcontrollers on boards using the TUSB320
What boards using the TUSB320 are built for
TUSB320: common questions
Where can I find a TUSB320 reference design?
Each of the 6 boards on this page is a real design using the TUSB320. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TUSB320 VDD pin connected?
The VDD pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the TUSB320.
How is the TUSB320 ID pin connected?
The ID pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TUSB320.
What resistor goes on the TUSB320 VBUS_DET pin?
The VBUS_DET pin has a series resistor on 3 of 6 designs, most often 1 MΩ. Counted from the KiCad layouts of 6 open source designs using the TUSB320.
What parts are used alongside the TUSB320?
The ANNA-B112, EMMC16G, FPF2286UCX, FSA1208 and FUSB303 appear in the most repositories here.
Which microcontrollers do boards using the TUSB320 use?
Most are built on Nordic nRF (1), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the TUSB320?
The median is 55.1 × 43.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the TUSB320?
By GitHub stars, USB armory Mk II by usbarmory, with 1,498 stars.
Can I simulate one of these boards using the TUSB320 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.