NH PCB
About the NH PCB
NH PCB is an open source NXP PCB design by AIAANortheastern, published on GitHub. It is a 2-layer board measuring 101.6 × 63.5 mm, with 26 components from 22 distinct parts.
Its main chip is the Teensy3.6, from the NXP family. Other key parts include the ACCL_BOB_A1413 and 10DOF_A1604. By type, the board carries 7 connectors, 4 diodes, 3 ICs, 3 capacitors, 2 jumpers and 1 battery holder.
From the project
Project Karman's simulations
Main components on the NH PCB
NH PCB bill of materials (BOM)
26 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy3.6 | Teensy35_36 | U1 |
| 1 | ACCL_BOB_A1413 | Accel_BOB_A1413 | U2 |
| 1 | 10DOF_A1604 | 10DOF_BOB_ADA16014 | U3 |
| 1 | Xbee-Conn | IDC_Header_Straight_10pins | J1 |
| 1 | STRAT_CONN | JST_SH_SM05B-SRSS-TB_05x1.00mm_Angled | J2 |
| 1 | Pow_byp | Pin_Header_Straight_1x03 | J3 |
| 1 | BARREL_JACK | BARREL_JACK_W_Header_Holes | J4 |
| 1 | SPI_debug | Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | I2C_Debug | Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | Pow_in | Pin_Header_Straight_1x02 | J7 |
| 1 | Battery_Cell | CR1220_Conn_TH_MPD | BT1 |
| 1 | Buzzer | Buzzer_A1536 | BZ1 |
| 1 | VUSB_Jump | Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | 33_Jump | Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | L7805AC | TO-220_Vertical | REG1 |
| 1 | L4931 | TO-92_Inline_Wide | Reg1 |
| 2 | TCA-ADA-269 | TCA_BOB_ADA269 | TC1, TC2 |
| 3 | D_Schottky | Diode_DO-41_SOD81_Vertical_AnodeUp | D1, D2, D3 |
| 1 | LED | LED-3MM | D4 |
| 2 | 10µF | C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1, C2 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF | C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C3 |
| 1 | 180 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
NH PCB design files
The KiCad project lives in the AIAANortheastern/KarmanSims repository on GitHub; these links point at the commit this page was built from.
NH PCB: common questions
What microcontroller does the NH PCB use?
The NH PCB is built around the Teensy3.6, from the NXP family.
How big is the NH PCB?
The NH PCB measures 101.6 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NH PCB?
26 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the NH PCB design files?
From the AIAANortheastern/KarmanSims repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the NH PCB design in my own project?
The repository has no license, so all rights stay with AIAANortheastern. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NH PCB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in KarmanSims
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532