LEDtentou
About the LEDtentou PCB
LEDtentou is an open source PCB design by akihiro-kataoka, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 3 components from 3 distinct parts.
By type, the board carries 1 connector, 1 diode and 1 resistor.
LEDtentou bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | WS2812B LED | LED_D5.0mm | D1 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
LEDtentou design files
The KiCad project lives in the akihiro-kataoka/KiCad_Circuit-Board_data repository on GitHub; these links point at the commit this page was built from.
LEDtentou: common questions
How big is the LEDtentou PCB?
The LEDtentou measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LEDtentou?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LEDtentou design files?
From the akihiro-kataoka/KiCad_Circuit-Board_data repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LEDtentou design in my own project?
The repository has no license, so all rights stay with akihiro-kataoka. Use it as a reference, and ask the author before reusing the design.
More boards in KiCad_Circuit-Board_data
LINESensorV4.1
122.6 × 130 mm78 parts2LNo license0
AVR/ArduinoMAIN V1.2
100 × 115 mm67 parts2LNo license0
NeoPixel
100 × 100 mm34 parts2LNo license0
Enjoy!!!
246 × 246 mm26 parts2LNo license0
BALLSensorV2.1
99.9 × 99.9 mm18 parts2LNo license0
MOTORDRIVEV2.1
80 × 45 mm14 parts2LNo license0
ELECT V2.1
80 × 45 mm10 parts2LNo license0
Ballcatch sensor
28 × 10 mm4 parts2LNo license0
YoutubeStudy
47 × 29 mm3 parts2LNo license0