FlightComputer-Keypad
About the FlightComputer-Keypad PCB
FlightComputer-Keypad is an open source PCB design by akkdong, published on GitHub. It is a 2-layer board measuring 148 × 42 mm, with 47 components from 17 distinct parts.
By type, the board carries 27 resistors, 9 switches, 9 capacitors and 2 connectors.
From the project
Flight assistant computer
FlightComputer-Keypad bill of materials (BOM)
47 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X10 Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | CONN_01X10 Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J2 |
| 9 | SW_Push | SW-SPST-PTS647 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1 |
| 3 | EMF105B7104MVHF 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3 |
| 2 | JMK105BC6475MV-F 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5 |
| 2 | HMK105B7221KVHFE 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7 |
| 2 | 10UF 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C9 |
| 6 | 33R 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4, R5, R13 |
| 8 | 33R 100K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7, R8, R9, R10, R16, R17, R27 |
| 2 | 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12 |
| 1 | 10K 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 100K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 2 | CRCW04021M00FKEDC 100K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R20 |
| 1 | 47.5K 100K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19 |
| 1 | 52.3K 33R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 1 | 43K 33R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R22 |
| 4 | 33R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R23, R24, R25, R26 |
FlightComputer-Keypad design files
The KiCad project lives in the akkdong/FlightComputer repository on GitHub; these links point at the commit this page was built from.
FlightComputer-Keypad: common questions
How big is the FlightComputer-Keypad PCB?
The FlightComputer-Keypad measures 148 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FlightComputer-Keypad?
47 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FlightComputer-Keypad design files?
From the akkdong/FlightComputer repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the FlightComputer-Keypad design in my own project?
The repository has no license, so all rights stay with akkdong. Use it as a reference, and ask the author before reusing the design.
