Astable multivibrator

akshat-kumar10·astable-multivibrator-pcb

Astable multivibrator PCB layout, top view — open source board by akshat-kumar10

About the Astable multivibrator PCB

Astable multivibrator is an open source PCB design by akshat-kumar10, published on GitHub. It is a 2-layer board measuring 59 × 36 mm, with 9 components from 8 distinct parts.

Other key parts include the NE555P. By type, the board carries 3 resistors, 2 connectors, 2 capacitors, 1 IC and 1 diode.

From the project

A through-hole KiCad project implementing an astable multivibrator using a NE555 timer in DIP-8 format. The board generates a blinking output signal and includes an LED indicator plus external terminal connections for power and signal output.

A through-hole KiCad project implementing an astable multivibrator using a NE555 timer in DIP-8 format. The board generates a blinking output signal and includes an LED indicator plus external terminal connections for power and signal output.

- Circuit type: Astable multivibrator - IC: NE555P (DIP-8) - Supply: DC power input via 2-pin terminal block (J1) - Output: 2-pin terminal block (J2) provides the NE555 output and ground reference - Board type: 2-layer PCB, 1.6 mm thickness, through-hole components

Astable multivibrator, from the project README
From the project README

Main components on the Astable multivibrator

Astable multivibrator bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
1
NE555P
U1
2
Conn_01x02
J1, J2
1
LED
D1
1
10uF
C1
1
0.1uF
C2
1
2K
R1
1
146K
R2
1
560
R3

Astable multivibrator design files

The KiCad project lives in the akshat-kumar10/astable-multivibrator-pcb repository on GitHub; these links point at the commit this page was built from.

Astable multivibrator: common questions

How big is the Astable multivibrator PCB?

The Astable multivibrator measures 59 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Astable multivibrator?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Astable multivibrator design files?

From the akshat-kumar10/astable-multivibrator-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Astable multivibrator design in my own project?

The repository has no license, so all rights stay with akshat-kumar10. Use it as a reference, and ask the author before reusing the design.