237 open source boards using the NE555P
Real designs built with the NE555P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76AVR/Arduino
Replica datanetics
schlae
298.5 × 139.7 mm145 parts2LNo license42Touchtone555
DarcyJProjects
200 × 96 mm73 parts2LCERN-OHL-S-2.032Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT2924h Digital Clock
erikvanzijst
152.9 × 74.9 mm82 parts2LNo license21Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18SynthCard
benjiaomodular
88.9 × 50.8 mm16 parts2LMIT18SAP-Plus Memory Loader
TomNisbet
150 × 100 mm57 parts2LMIT10Rosco 6502
rosco-6502
100 × 100 mm55 parts4LMIT8Atari65 130XE C070067
jimbro1000
323.9 × 204 mm327 parts4LNo license4PIC
OpenAC1
davischris
191.5 × 97.6 mm71 parts2LGPL-3.04Pwm driver
mjkloeckner
35 × 35 mm10 parts2LMIT3VMFB
src1138
150.4 × 114 mm135 parts2LGPL-3.02FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02Inductor tester
ikatkov
62.5 × 46.2 mm31 parts4LNo license2Led chaser
notyourcto
87 × 38.9 mm30 parts2LNo license2PowerB
lukokemba2
90 × 90 mm23 parts2LNo license2GettingToBlinky
arildj78
91.5 × 61 mm22 parts2LMIT2Intro to
YorkEngSoc
100 × 60 mm20 parts2LNo license2Open8-VGA
adham404
313 × 259.5 mm321 parts6LMIT1Pcb regulador solar V1.0
IoTCloudStudio
361.6 × 135.4 mm187 parts2LNo license1AVR/Arduino
Inefficient coil gun
jamesbrayy
440 × 196 mm151 parts2LMIT1Mini-8085
89Mods
155.1 × 97.8 mm67 parts2LMIT1EPROM-Programmer
codesqueak
140 × 100 mm66 parts2LCERN-OHL-S-2.01TRACTIVE SYSTEM ACTIVE LIGHT EVO1
RushankT
100.3 × 99 mm65 parts2LNo license1TVZSolderingPracticeKit
jkordek1
100 × 100 mm40 parts2LNo license1Jerry
jacks-hax
52.1 × 37.5 mm32 parts2LGPL-3.01Christmas Light
Az154za
73.3 × 37 mm32 parts2LNo license1Smd vacuum
sdp8483
71 × 72.4 mm28 parts2LMIT1Clock module
Ottoputer
61.4 × 53.3 mm26 parts2LGPL-3.01SpiderBlink
Sudo-Aju
39.6 × 41.4 mm20 parts2LNo license1555-chaser led flower
anya39
93.2 × 93.9 mm19 parts2LNo license1555-LED-Chaser
VritoX098
37.9 × 21.5 mm19 parts2LNo license1RobiV4
frankyhub
67.7 × 95.3 mm17 parts2LMIT1Mech mouse jiggler
barrettotte
71.1 × 54.6 mm16 parts2LMIT1
How designs wire the NE555P
Read from the KiCad layouts of 191 open source designs, one per repository: what each pin of the NE555P connects to, and the resistors, capacitors and other passives placed on it.
- The THR pin has a capacitor to GND on 153 of 191 designs, most often 1 µF (then 10 µF).
- The TR pin has a capacitor to GND on 148 of 191 designs, most often 1 µF (then 100 nF).
- The CV pin has a capacitor to GND on 132 of 191 designs, most often 10 nF (then 100 nF).
- The DIS pin has a pull-up to 5V on 119 of 190 designs, most often 1 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 92% | — |
| TRpin 2 | Connected to: Signal 99% |
|
| Qpin 3 | Connected to: A connector 26%, 4017 24% |
|
| Rpin 4 | Connected to: 5V 73% · a signal 25% | — |
| CVpin 5 | Connected to: Signal 76% · not connected 24% |
|
| THRpin 6 | Connected to: Signal 98% |
|
| DISpin 7 | Connected to: Signal 94% |
|
| VCCpin 8 | Connected to: 5V 82% · a signal 18% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Biodata by QuinnFreedman, LittleSixteen by SukkoPera, Replica datanetics by schlae and Touchtone555 by DarcyJProjects.
The NE555P in open source designs
The gallery holds 237 open source boards using the NE555P from 203 GitHub repositories; a typical one measures about 81.3 × 66.6 mm and carries around 19 components.
94% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is Biodata by QuinnFreedman.
Parts used alongside the NE555P
Microcontrollers on boards using the NE555P
What boards using the NE555P are built for
NE555P: common questions
Where can I find a NE555P reference design?
Each of the 237 boards on this page is a real design using the NE555P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NE555P THR pin connected?
The THR pin has a capacitor to GND on 153 of 191 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 191 open source designs using the NE555P.
How is the NE555P TR pin connected?
The TR pin has a capacitor to GND on 148 of 191 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 191 open source designs using the NE555P.
How is the NE555P CV pin connected?
The CV pin has a capacitor to GND on 132 of 191 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 191 open source designs using the NE555P.
What parts are used alongside the NE555P?
The 4017, 74LS08, 74LS00, 74LS74 and 74LS04 appear in the most repositories here.
Which microcontrollers do boards using the NE555P use?
Most are built on AVR/Arduino (11), ESP32 (3), PIC (2) and STM32 (1).
How big is a typical board using the NE555P?
The median is 81.3 × 66.6 mm, and 94% are two-layer designs.
What is the most popular open source board using the NE555P?
By GitHub stars, Biodata by QuinnFreedman, with 114 stars.
Can I simulate one of these boards using the NE555P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.