RE42
AL-255·RE42·RE/DM42n-calcbase6/DM42n-calcbase6.kicad_sch
About the RE42 PCB
RE42 is an open source STM32 PCB design by AL-255, published on GitHub. It is a board, with 59 components from 30 distinct parts.
Its main chip is the STM32U575RITxQ, from the STM32 family. Other key parts include the IXD2140, USBLC6-4SC6, SiP32432DR3, MX25R6435F and AIC1747-33xV5Nxx. By type, the board carries 22 capacitors, 14 resistors, 6 ICs, 4 inductors, 3 connectors and 2 crystals.
From the project
Reverse Engineering of the DM42 Platform
Main components on the RE42
RE42 bill of materials (BOM)
59 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IXD2140 | SOT-23-5_HandSoldering | U1 |
| 1 | USBLC6-4SC6 | SOT-23-6 | U2 |
| 1 | STM32U575RITxQ | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SiP32432DR3 | SOT-363_SC-70-6 | U4 |
| 1 | MX25R6435F | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | AIC1747-33xV5Nxx | SOT-23-5 | U7 |
| 1 | 32.768K | Y1 | |
| 1 | 16.000MHz | Y3 | |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | 2.54mm | J4, J5 | |
| 1 | CR2032 | BATT_CR2032 | |
| 1 | Buzzer | BZ1 | |
| 1 | Jumper_2_Open | JP2 | |
| 1 | LS027B7DH01 | LCD1 | |
| 1 | PGM | SW1 | |
| 1 | RESET | SW2 | |
| 2 | ? | D1, D2 | |
| 2 | FerriteBead_Small | FB1, FB2 | |
| 2 | ? | L1, L2 | |
| 22 | ? | C1, C3, C4, C5, C6, C7, C8, C9 +14 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 1 | 510 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | 420 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 2 | 22 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R11 |
| 1 | 51k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 10M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 2 | 0 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17 |
| 1 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 2 | 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R22, R23 |
RE42 design files
The KiCad project lives in the AL-255/RE42 repository on GitHub; these links point at the commit this page was built from.
RE42: common questions
What microcontroller does the RE42 use?
The RE42 is built around the STM32U575RITxQ, from the STM32 family.
How many components are on the RE42?
59 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the RE42 design files?
From the AL-255/RE42 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the RE42 design in my own project?
The repository has no license, so all rights stay with AL-255. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RE42 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k