HardLabs

003RoboticsStartStop

Alex-C-EE·StartStopModule·003Robotics/Modul/003RoboticsStartStop/003RoboticsStartStop.kicad_pcb

003RoboticsStartStop PCB layout, top view — open source STM32 board by Alex-C-EE

About the 003RoboticsStartStop PCB

003RoboticsStartStop is an open source STM32 PCB design by Alex-C-EE, published on GitHub. It is a 4-layer board measuring 12 × 11 mm, with 14 components from 12 distinct parts.

Its main chip is the STM32C011F4, from the STM32 family. Other key parts include the TSOP392 and LDK220PU33R. By type, the board carries 4 diodes, 4 capacitors, 3 ICs, 1 connector, 1 fuse and 1 resistor.

From the project

A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.

Main components on the 003RoboticsStartStop

TSOP392STM32C011F4LDK220PU33R

003RoboticsStartStop bill of materials (BOM)

14 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TSOP392
U2
1
STM32C011F4
U3
1
LDK220PU33R
U4
1
I/O Header
J2
1
100 mA
F1
2
H3V3N10B
hongjiacheng
D1, D2
1
1SS389
hongjiacheng
D3
1
Red
Hubei KENTO Elec
D4
1
10NF
1uF
Samsung Electro-Mechanics
C1
2
100NF
100nF
Samsung Electro-Mechanics
C2, C6
1
1UF
1uF
Samsung Electro-Mechanics
C4
1
1kΩ
UNI-ROYAL(Uniroyal Elec)
R1

003RoboticsStartStop design files

The KiCad project lives in the Alex-C-EE/StartStopModule repository on GitHub; these links point at the commit this page was built from.

003RoboticsStartStop: common questions

What microcontroller does the 003RoboticsStartStop use?

The 003RoboticsStartStop is built around the STM32C011F4, from the STM32 family.

How big is the 003RoboticsStartStop PCB?

The 003RoboticsStartStop measures 12 × 11 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 003RoboticsStartStop?

14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 003RoboticsStartStop design files?

From the Alex-C-EE/StartStopModule repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 003RoboticsStartStop design in my own project?

The repository has no license, so all rights stay with Alex-C-EE. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 003RoboticsStartStop without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in StartStopModule

Similar boards