Oscilloscope drawing
AlexanderHD27·oscilloscope-drawing·circuits/dac-pcb/dac-pcb.kicad_pcb
About the Oscilloscope drawing PCB
Oscilloscope drawing is an open source PCB design by AlexanderHD27, published on GitHub under the MIT license. It is a 2-layer board measuring 46.7 × 18.8 mm, with 50 components from 2 distinct parts.
By type, the board carries 49 resistors and 1 connector.
It belongs with the test & measurement designs in this gallery.
From the project
This Project is my shot at this. I use custom hardware (build on perf-board) to archive this goal. I have build a 2-Channel 16bit DAC with an refresh rate of around 1 MSample per second. Further more a usb-interface + driver shall be developed.
This Project is my shot at this. I use custom hardware (build on perf-board) to archive this goal. I have build a 2-Channel 16bit DAC with an refresh rate of around 1 MSample per second. Further more a usb-interface + driver shall be developed.
Everything is solder onto pref-boards an connected via pin-headers and jumpers
(Diagram of the System-Hardware components)

Oscilloscope drawing bill of materials (BOM)
50 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x18 | PinHeader_1x18_P2.54mm_Horizontal | J1 |
| 49 | 10k | R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8 +41 |
Oscilloscope drawing design files
The KiCad project lives in the AlexanderHD27/oscilloscope-drawing repository on GitHub; these links point at the commit this page was built from.
Oscilloscope drawing: common questions
How big is the Oscilloscope drawing PCB?
The Oscilloscope drawing measures 46.7 × 18.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Oscilloscope drawing?
50 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the Oscilloscope drawing design files?
From the AlexanderHD27/oscilloscope-drawing repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Oscilloscope drawing design in my own project?
Yes, under the terms of its MIT license, which AlexanderHD27 chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528