Stylophone-1968
About the Stylophone-1968 PCB
Stylophone-1968 is an open source PCB design by Alloyed, published on GitHub under the MIT license. It is a 2-layer board measuring 150 × 100 mm, with 78 components from 49 distinct parts.
By type, the board carries 55 resistors, 8 capacitors, 4 connectors, 3 transformers, 2 switches and 2 diodes.
From the project
read-only mirror
folders starting with , eg designrules represent shared templates/libraries for all modules. all other folders are an individual module.
Stylophone-1968 bill of materials (BOM)
78 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | Stylus | eggbug_icon | J2 |
| 1 | WQP-WQP518MA AudioJack2 Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | WQP-WQP518MA LineOut Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | 9V Battery | BatteryHolder_Eagle_12BH611-GR | BT1 |
| 1 | 8 ohm 1/4w Speaker | mouser_speaker | LS1 |
| 1 | Power | SLW-1277744-3A-N-D | SW1 |
| 1 | Vibrato | SLW-1277744-3A-N-D | SW2 |
| 2 | BC337 | TO-92_HandSolder | T1, T3 |
| 1 | 2N6027 | TO-92_HandSolder | T2 |
| 1 | 5k | Potentiometer_Bourns_3266Y_Vertical | VR1 |
| 1 | A10k | RD901F4015R1B10K00DL1 | VR2 |
| 1 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | LED | LED_D3.0mm | D2 |
| 1 | 100uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 7 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C7, C8 |
| 3 | 390K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R14 |
| 1 | 13K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | 68K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 1 | 10M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 33K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R28 |
| 1 | 150k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 3 | 2K2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R13, R43 |
| 1 | 1K8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 2 | 6K8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R25 |
| 2 | 47R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R42 |
| 2 | 5K6 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R17 |
| 1 | 270R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 270K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 3 | 4K7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R21, R27 |
| 1 | 470R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 2 | 150R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R34 |
| 3 | 3K9 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R29, R31 |
| 2 | 680R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R50 |
| 1 | 12K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 820K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 1 | 56K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 2 | 3K3 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33, R36 |
| 1 | 330K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 4 | 2K7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R37, R39, R41, R46 |
| 2 | 390R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38, R44 |
| 1 | 220R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40 |
| 1 | 27K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45 |
| 3 | 1K5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47, R49, R51 |
| 1 | 820R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R48 |
| 1 | 560R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R52 |
| 1 | 470K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53 |
| 1 | 22K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R54 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R55 |
Stylophone-1968 design files
The KiCad project lives in the Alloyed/KitsBlips repository on GitHub; these links point at the commit this page was built from.
Stylophone-1968: common questions
How big is the Stylophone-1968 PCB?
The Stylophone-1968 measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stylophone-1968?
78 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stylophone-1968 design files?
From the Alloyed/KitsBlips repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stylophone-1968 design in my own project?
Yes, under the terms of its MIT license, which Alloyed chose for the repository.
More boards in KitsBlips
4gates
34 × 100 mm80 parts2LMIT2
Mixer
80.8 × 110 mm75 parts2LMIT2
Logic
40 × 110 mm57 parts2LMIT2
Csfilter
80.8 × 110 mm44 parts2LMIT2
4knobs.circuitjs
70.7 × 21.1 mm34 parts2LMIT2
Noise
19.9 × 100 mm28 parts2LMIT2
Quantize
60.5 × 100 mm25 parts2LMIT2
ES Daisy Patch SM FB Rev1
48.5 × 111 mm24 parts2LMIT2
Eurorack
80.8 × 110 mm14 parts2LMIT2
Tracker
70 × 100 mm14 parts2LMIT2
Midi
91 × 50 mm5 parts2LMIT2