Csfilter
About the Csfilter PCB
Csfilter is an open source PCB design by Alloyed, published on GitHub under the MIT license. It is a 2-layer board measuring 80.8 × 110 mm, with 44 components from 23 distinct parts.
Other key parts include the V2164M, TL074 and TL072. By type, the board carries 18 resistors, 11 capacitors, 7 connectors, 4 ICs and 2 diodes.
From the project
read-only mirror
folders starting with , eg designrules represent shared templates/libraries for all modules. all other folders are an individual module.
Main components on the Csfilter
Csfilter bill of materials (BOM)
44 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | V2164M | DIP-16_W7.62mm_Socket | U1 |
| 2 | TL074 | DIP-14_W7.62mm_Socket | U2, U3 |
| 1 | TL072 | DIP-8_W7.62mm_Socket | U4 |
| 1 | WQP-WQP518MA IN Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 2 | WQP-WQP518MA CV Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2, J3 |
| 1 | WQP-WQP518MA LPF Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | WQP-WQP518MA HPF Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | WQP-WQP518MA BPF Wenzhou QingPu Electronics Co | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6 |
| 1 | EURO_PWR_2x5 | Pins_2x05_2.54mm_TH_Europower_shrouded | J12 |
| 2 | b10k? | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2 |
| 2 | SS14 | D_SMA | D1, D2 |
| 2 | 10uF | CP_Radial_P2.5mm | C1, C2 |
| 4 | 0.1uf | C_Disc_D6.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 1 | 180p | C_Disc_D6.0mm_W2.5mm_P5.00mm | C7 |
| 2 | 1.5n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C8, C9 |
| 2 | 100pf | C_Disc_D6.0mm_W2.5mm_P5.00mm | C10, C11 |
| 3 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5 |
| 2 | 4.7m | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 1 | 820k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 3 | 270k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R11 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R12, R13 |
| 2 | 68k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R15 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R17, R18 |
Csfilter design files
The KiCad project lives in the Alloyed/KitsBlips repository on GitHub; these links point at the commit this page was built from.
Csfilter: common questions
How big is the Csfilter PCB?
The Csfilter measures 80.8 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Csfilter?
44 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Csfilter design files?
From the Alloyed/KitsBlips repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Csfilter design in my own project?
Yes, under the terms of its MIT license, which Alloyed chose for the repository.
More boards in KitsBlips
4gates
34 × 100 mm80 parts2LMIT2
Stylophone-1968
150 × 100 mm78 parts2LMIT2
Mixer
80.8 × 110 mm75 parts2LMIT2
Logic
40 × 110 mm57 parts2LMIT2
4knobs.circuitjs
70.7 × 21.1 mm34 parts2LMIT2
Noise
19.9 × 100 mm28 parts2LMIT2
Quantize
60.5 × 100 mm25 parts2LMIT2
ES Daisy Patch SM FB Rev1
48.5 × 111 mm24 parts2LMIT2
Eurorack
80.8 × 110 mm14 parts2LMIT2
Tracker
70 × 100 mm14 parts2LMIT2
Midi
91 × 50 mm5 parts2LMIT2