Fullsize LED Board (Display)
alpyen·fpga-mediaplayer·kicad/fullsize_led_board/display/display.kicad_pcb
About the Fullsize LED Board (Display)
Fullsize LED Board (Display) is an open source PCB design by alpyen, published on GitHub. It is a 2-layer board measuring 233.5 × 181.5 mm, with 770 components from 3 distinct parts.
By type, the board carries 768 diodes and 2 connectors.
It belongs with the displays & leds and audio designs in this gallery.
From the project
HDL, Hardware & Software Development project to playback a video with sound and learn while doing so.
Hi there, and welcome to my FPGA project to deep dive into FPGA development and everything around it.
Watch a demo of this project on YouTube by clicking on this picture!
This is a beginner project on hardware development with FPGAs and VHDL to create a system that can play audio and video through an FPGA.
A FPGA development board -- here a Digilent Basys3 -- fetches audio and video data stored on the on-board flash memory chip, decodes them and drives a Digilent i2s2-PMOD for audio output and a custom designedLED matrix as the video display.

Fullsize LED Board (Display) bill of materials (BOM)
770 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Anodes Header | PinHeader_1x24_P2.54mm_Vertical | J1 |
| 1 | Cathodes Header | PinHeader_1x32_P2.54mm_Vertical | J2 |
| 768 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +760 |
Fullsize LED Board (Display) design files
The KiCad project lives in the alpyen/fpga-mediaplayer repository on GitHub; these links point at the commit this page was built from.
Fullsize LED Board (Display): common questions
How big is the Fullsize LED Board (Display)?
The Fullsize LED Board (Display) measures 233.5 × 181.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fullsize LED Board (Display)?
770 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fullsize LED Board (Display) design files?
From the alpyen/fpga-mediaplayer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fullsize LED Board (Display) design in my own project?
The repository has no license, so all rights stay with alpyen. Use it as a reference, and ask the author before reusing the design.
More boards in fpga-mediaplayer
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k