Pcb gebura s blade necklace
alsono·pcb-gebura-s-blade-necklace
About the Pcb gebura s blade necklace
Pcb gebura s blade necklace is an open source PCB design by alsono, published on GitHub. It is a 2-layer board measuring 71.8 × 71.8 mm, with 15 components from 9 distinct parts.
Other key parts include the ICM7555XP. By type, the board carries 5 diodes, 4 resistors, 1 IC, 1 module, 1 transistor and 1 battery holder.

Main components on the Pcb gebura s blade necklace
Pcb gebura s blade necklace bill of materials (BOM)
15 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM7555XP ICM7555xP | DIP-8_W7.62mm | U2 |
| 1 | Motor_DC | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | M1 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | SW_Push | KSA_Tactile_SPST | SW2 |
| 5 | LED | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1, D2, D3, D4, D5 |
| 1 | C | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 3 | 4.7K 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R4 |
| 1 | 47K 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
Pcb gebura s blade necklace design files
The KiCad project lives in the alsono/pcb-gebura-s-blade-necklace repository on GitHub; these links point at the commit this page was built from.
- Layoutgeburas blade.kicad_pcb
- Schematicgeburas blade.kicad_sch
- BOMgeburas blade.csv
Pcb gebura s blade necklace: common questions
How big is the Pcb gebura s blade necklace?
The Pcb gebura s blade necklace measures 71.8 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb gebura s blade necklace?
15 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pcb gebura s blade necklace design files?
From the alsono/pcb-gebura-s-blade-necklace repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pcb gebura s blade necklace design in my own project?
The repository has no license, so all rights stay with alsono. Use it as a reference, and ask the author before reusing the design.