11 open source boards using the ICM7555xP
Real designs built with the ICM7555xP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MetaphoricV2
OldWer
204.5 × 138 mm140 parts2LCC0-1.05TestCircuit
martinbros
51.8 × 46.7 mm18 parts2LGPL-3.01Energy-Efficient-Night-Light with-Motion and-Ambient-Light-Detection
Electrical-Projects
66.9 × 34.2 mm42 parts2LNo license0BlinkingHeart
AboKafta
115.3 × 91 mm34 parts2LNo license0Pcb gebura s blade necklace
alsono
71.8 × 71.8 mm15 parts2LNo license0PCB-Name-Card
iloveadrenaline
100 × 60 mm12 parts2LMIT0Astable-555-timer
EsdrasMukuku
38.5 × 38.5 mm10 parts2LNo license0Blinking-LED-Documentation
nizarbadriali
51 × 30.5 mm9 parts2LMIT0Motor Speed Controller
SelvaUx
132.5 × 135 mm12 parts2LNo license0ASDR
PancakeLegend
50 × 100 mm40 parts2LGPL-3.02ASDR - Old
PancakeLegend
50 × 100 mm40 parts2LGPL-3.02
How designs wire the ICM7555xP
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ICM7555xP connects to, and the resistors, capacitors and other passives placed on it.
- The Q pin has a series resistor on 10 of 10 designs, most often 100 Ω (then 470 Ω).
- The TR pin has a series resistor on 6 of 10 designs, most often 4.7 kΩ (then 10 kΩ).
- The THR pin has a capacitor to GND on 6 of 10 designs, most often 10 µF (then 100 nF).
- The THR pin has a series resistor on 6 of 10 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 70% · a signal 30% | — |
| TRpin 2 | Connected to: Signal 100% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| CVpin 5 | Connected to: Not connected 50% · a signal 50% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Signal 90% |
|
| VCCpin 8 | Connected to: VCC 60% · a signal 40% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MetaphoricV2 by OldWer, ASDR by PancakeLegend, TestCircuit by martinbros and BlinkingHeartPCB by AboKafta.
The ICM7555xP in open source designs
The gallery holds 11 open source boards using the ICM7555xP from 10 GitHub repositories; a typical one measures about 66.9 × 71.8 mm and carries around 18 components.
100% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is MetaphoricV2 by OldWer.
What boards using the ICM7555xP are built for
ICM7555xP: common questions
Where can I find a ICM7555xP reference design?
Each of the 11 boards on this page is a real design using the ICM7555xP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the ICM7555xP Q pin?
The Q pin has a series resistor on 10 of 10 designs, most often 100 Ω (then 470 Ω). Counted from the KiCad layouts of 10 open source designs using the ICM7555xP.
What resistor goes on the ICM7555xP TR pin?
The TR pin has a series resistor on 6 of 10 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 10 open source designs using the ICM7555xP.
How is the ICM7555xP THR pin connected?
The THR pin has a capacitor to GND on 6 of 10 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the ICM7555xP.
How big is a typical board using the ICM7555xP?
The median is 66.9 × 71.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the ICM7555xP?
By GitHub stars, MetaphoricV2 by OldWer, with 5 stars.
Can I simulate one of these boards using the ICM7555xP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.