Nurse remote control
About the Nurse remote control PCB
Nurse remote control is an open source PCB design by Amaza-Ronald, published on GitHub. It is a 2-layer board measuring 167.6 × 79.8 mm, with 17 components from 17 distinct parts.
Other key parts include the MCP23017E_SS. By type, the board carries 12 switches, 2 capacitors, 1 IC, 1 connector and 1 resistor.
Main components on the Nurse remote control
Nurse remote control bill of materials (BOM)
17 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017E_SS | SSOP28 | IC1 |
| 1 | 1718560004 | CONN04_1718560004_MOL | J1 |
| 1 | BackRest_Up | SW_PUSH_6mm | SW1 |
| 1 | Knee-Up | SW_PUSH_6mm | SW2 |
| 1 | Fowler_On | SW_PUSH_6mm | SW3 |
| 1 | Bed_Up | SW_PUSH_6mm | SW4 |
| 1 | BackRest_Down | SW_PUSH_6mm | SW5 |
| 1 | Knee_Down | SW_PUSH_6mm | SW6 |
| 1 | Fowler_Off | SW_PUSH_6mm | SW7 |
| 1 | Bed_Down | SW_PUSH_6mm | SW8 |
| 1 | Trendelenburg | SW_PUSH_6mm | SW9 |
| 1 | R_Trendelenburg | SW_PUSH_6mm | SW10 |
| 1 | Patient_Lockout | SW_PUSH_6mm | SW11 |
| 1 | E_Stop | SW_PUSH_6mm | SW12 |
| 1 | 10uF | CAP_EEFSX0D221ER | C1 |
| 1 | 0.1uF | C_0603_1608Metric | C2 |
| 1 | 10K | R_0603_1608Metric | R1 |
Nurse remote control design files
The KiCad project lives in the Amaza-Ronald/KiCAD-projects- repository on GitHub; these links point at the commit this page was built from.
Nurse remote control: common questions
How big is the Nurse remote control PCB?
The Nurse remote control measures 167.6 × 79.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nurse remote control?
17 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nurse remote control design files?
From the Amaza-Ronald/KiCAD-projects- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nurse remote control design in my own project?
The repository has no license, so all rights stay with Amaza-Ronald. Use it as a reference, and ask the author before reusing the design.
More boards in KiCAD-projects-
ESP32Hospital Bed Controller
109.5 × 105.7 mm106 parts4LNo license0
Bluetooth Audio board
65.6 × 59.9 mm76 parts2LNo license0- schematic only · 74 partsSTM32
Intergrated BP+
74 parts2LNo license0 
ESP32Hospital bed control unit
32.2 × 34.2 mm56 parts4LNo license0
AVR/ArduinoDigital clock
209.2 × 96 mm41 parts2LNo license0
AVR/ArduinoTank side Control Unit
59.3 × 58 mm32 parts2LNo license0
AVR/ArduinoLoRa based pump reciever circuit
59.3 × 76.5 mm32 parts2LNo license0
Audio Amplifier with base
66 × 59.5 mm18 parts2LNo license0
TPS54331DDAR Buck converter
72 × 27 mm15 parts2LNo license0
Hospital bed patient remote circuit
43 × 65.5 mm13 parts2LNo license0
AVR/ArduinoLivestock monitor
32 × 24 mm12 parts2LNo license0