HardLabs

LoRa based pump reciever circuit

Amaza-Ronald·KiCAD-projects-·My Projects/LoRa Pump Project/Lora-Based pumpcontrol circuit reciever/Lora-Based pumpcontrol circuit reciever.kicad_pcb

LoRa based pump reciever circuit PCB layout, top view — open source AVR/Arduino board by Amaza-Ronald

About the LoRa based pump reciever circuit PCB

LoRa based pump reciever circuit is an open source AVR/Arduino PCB design by Amaza-Ronald, published on GitHub. It is a 2-layer board measuring 59.3 × 76.5 mm, with 32 components from 18 distinct parts.

Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the RFM95W-868S2, LM1117T-3.3 and LM7805_TO220. By type, the board carries 14 capacitors, 4 ICs, 4 connectors, 4 resistors, 3 diodes and 1 transistor.

It belongs with the rf & radio designs in this gallery.

Main components on the LoRa based pump reciever circuit

ATMEGA328P-PURFM95W-868S2LM1117T-3.3LM7805_TO220

LoRa based pump reciever circuit bill of materials (BOM)

32 components, 18 distinct parts.

QtyPartRefs
1
ATMEGA328P-PU
IC1
1
RFM95W-868S2
U1
1
LM1117T-3.3
U2
1
LM7805_TO220
U3
1
2N2222A
Q1
1
Crystal
Y1
2
Conn_01x02_Pin
J1, J2
1
R302302000
J4
1
Conn_01x01_Pin
J5
1
SRD-05VDC-SL-C
K1
1
RED
D1
1
GREEN
D2
1
1N4007
D3
2
22Pf
C1, C2
8
0.1uF
C3, C4, C5, C6, C9, C12, C13, C14
4
10uF
C7, C8, C10, C11
1
10K
R1
3
1K
R2, R3, R4

LoRa based pump reciever circuit design files

The KiCad project lives in the Amaza-Ronald/KiCAD-projects- repository on GitHub; these links point at the commit this page was built from.

LoRa based pump reciever circuit: common questions

What microcontroller does the LoRa based pump reciever circuit use?

The LoRa based pump reciever circuit is built around the ATMEGA328P-PU, from the AVR/Arduino family.

How big is the LoRa based pump reciever circuit PCB?

The LoRa based pump reciever circuit measures 59.3 × 76.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LoRa based pump reciever circuit?

32 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the LoRa based pump reciever circuit design files?

From the Amaza-Ronald/KiCAD-projects- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LoRa based pump reciever circuit design in my own project?

The repository has no license, so all rights stay with Amaza-Ronald. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LoRa based pump reciever circuit without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KiCAD-projects-

Similar boards