Gahan-AI PCB Intern Assessment
amoghsp123·Gahan-AI_PCB_Intern_Assessment·Project_Files/STM32G_SuperSpeed_USB_Sensor_Module.kicad_pcb
About the Gahan-AI PCB Intern Assessment
Gahan-AI PCB Intern Assessment is an open source STM32 PCB design by amoghsp123, published on GitHub. It is a 2-layer board measuring 30 × 27.5 mm, with 13 components from 10 distinct parts.
Its main chip is the STM32G431KBTx, from the STM32 family. By type, the board carries 5 resistors, 4 connectors, 2 capacitors, 1 IC and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
PCB Designer Intern Assessment submission including STM32G431KBTx USB-C PCB design, schematic, PCB layout, Gerber files, BOM, and additional assessment tasks.
This repository contains the submission for the PCB Designer Intern Assessment.
- STM32G431KBTx based PCB design - USB Type-C interface - SWD debugging connector - I2C sensor interface - UART sensor interface - Status LED circuitry - PCB layout, routing, and Gerber generation - Reverse order of words program - Embedded C LED blinking program
- STM32G431KBTx Microcontroller - USB Type-C USB 2.0 Connector - SWD Debug Header - I2C Interface Header - UART Interface Header - Status LED - Decoupling Capacitors - Pull-up Resistors - Two-layer PCB Design
Main components on the Gahan-AI PCB Intern Assessment
Gahan-AI PCB Intern Assessment bill of materials (BOM)
13 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431KBTx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | STATUS_LED | LED_0805_2012Metric | D1 |
| 2 | 100nF | C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | R_0805_2012Metric | R1, R2 |
| 1 | 330 | R_0805_2012Metric | R3 |
| 2 | 4.7k | R_0805_2012Metric | R4, R5 |
Gahan-AI PCB Intern Assessment design files
The KiCad project lives in the amoghsp123/Gahan-AI_PCB_Intern_Assessment repository on GitHub; these links point at the commit this page was built from.
Gahan-AI PCB Intern Assessment: common questions
What microcontroller does the Gahan-AI PCB Intern Assessment use?
The Gahan-AI PCB Intern Assessment is built around the STM32G431KBTx, from the STM32 family.
How big is the Gahan-AI PCB Intern Assessment?
The Gahan-AI PCB Intern Assessment measures 30 × 27.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gahan-AI PCB Intern Assessment?
13 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gahan-AI PCB Intern Assessment design files?
From the amoghsp123/Gahan-AI_PCB_Intern_Assessment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gahan-AI PCB Intern Assessment design in my own project?
The repository has no license, so all rights stay with amoghsp123. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Gahan-AI PCB Intern Assessment without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k