10 open source boards using the STM32G431KBTx

Real designs built with the STM32G431KBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the STM32G431KBTx

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the STM32G431KBTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF).
  • The PB8 pin has a resistor to GND on 7 of 9 designs, most often 10 kΩ (then 100 kΩ).
  • The PG10 pin has a capacitor to GND on 5 of 9 designs, most often 100 nF (then 10 nF).
  • The VDDA pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 1 µF).
VDDpin 1, 17Connected to: 3.3V 100%
  • Decoupling capacitor on 89% · 100 nF (19), 10 µF (4), 1 µF (4)
PF0pin 2Connected to: A connector 22% · not connected 22%
  • Series resistor on 33% · 0 Ω (2), 1.6 kΩ (1), 10 kΩ (1)
  • Capacitor to GND on 33% · 10 pF (2), 12 pF (1)
  • Crystal on 33% · 24 MHz (1)
PF1pin 3Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 0 Ω (2), 1.6 kΩ (1), 10 kΩ (1)
  • Capacitor to GND on 33% · 10 pF (2), 12 pF (1)
  • Crystal on 33% · 24 MHz (1)
PG10pin 4Connected to: A connector 67%
  • Capacitor to GND on 56% · 100 nF (4), 10 nF (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (3)
VSSApin 14Connected to: GND 100%
VDDApin 15Connected to: 3.3V 89%
  • Decoupling capacitor on 56% · 100 nF (10), 1 µF (2), 10 µF (2)
VSSpin 16, 32Connected to: GND 100%
PA8pin 18Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 10 kΩ (2), 300 Ω (1)
PA11pin 21Connected to: A connector 44%
  • Series resistor on 33% · 0 Ω (2), 10 kΩ (1)
PA12pin 22Connected to: A connector 44%
  • Series resistor on 33% · 0 Ω (2), 10 kΩ (1)
PB8pin 31Connected to: Signal 89%
  • Resistor to GND on 78% · 10 kΩ (6), 100 kΩ (1)

19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bilan PCB by AresEnsea, Stm32-nrf24-wireless node by denysderihlazov, Reflow Plate Controller by incend1um3 and Open PWM Gyro by jerinabr.

The STM32G431KBTx in open source designs

The gallery holds 10 open source boards using the STM32G431KBTx from 9 GitHub repositories; a typical one measures about 40.5 × 36 mm and carries around 38 components.

50% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Bilan PCB by AresEnsea.

Microcontrollers on boards using the STM32G431KBTx

STM32G431KBTx: common questions

Where can I find a STM32G431KBTx reference design?

Each of the 10 boards on this page is a real design using the STM32G431KBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G431KBTx VDD pin?

The VDD pins have a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the STM32G431KBTx.

What resistor goes on the STM32G431KBTx PB8 pin?

The PB8 pin has a resistor to GND on 7 of 9 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 9 open source designs using the STM32G431KBTx.

How is the STM32G431KBTx PG10 pin connected?

The PG10 pin has a capacitor to GND on 5 of 9 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the STM32G431KBTx.

Which microcontrollers do boards using the STM32G431KBTx use?

Most are built on STM32 (10).

How big is a typical board using the STM32G431KBTx?

The median is 40.5 × 36 mm, and 50% are two-layer designs.

What is the most popular open source board using the STM32G431KBTx?

By GitHub stars, Bilan PCB by AresEnsea, with 7 stars.

Can I simulate one of these boards using the STM32G431KBTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part