Ledplay
andbof·ledplay
About the Ledplay PCB
Ledplay is an open source PCB design by andbof, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 50 × 50 mm, with 86 components from 34 distinct parts.
Other key parts include the MKE04Z8VWJ4, 4093, LT1610 and LTC3429. By type, the board carries 34 resistors, 21 capacitors, 8 connectors, 5 ICs, 4 transistors and 2 diodes.
From the project
A small childrens toy for teaching binary numbers
Ledplay is a small project aimed as a childrens toy. It uses a Cortex M0+ (Kinetis KE04, MKE04Z8VWJ4) to light button leds in binary order, waiting for them to be pressed. When a complete number has been pressed, it progresses to the next, until all have been exhausted. It then resets from one.
Copyright (C) 2016 Andreas Bofjäll , see LICENSE for licensing details.
Main components on the Ledplay
Ledplay bill of materials (BOM)
86 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MKE04Z8VWJ4 | SOIC-20_7.5x12.8mm_Pitch1.27mm | U1 |
| 2 | 4093 | SOIC-14_N | U2, U3 |
| 1 | LT1610 | MSOP-8 | U4 |
| 1 | LTC3429 | SOT-23 | U5 |
| 4 | BSS138 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | 14.7456 MHz | Crystal_HC49-SD_SMD | Y1 |
| 1 | UART_CONN | UART_CONN | J1 |
| 1 | CORTEX_DEBUG | CORTEX_DEBUG | J2 |
| 1 | PWRCON_01X02 | Socket_MOLEX-KK-RM2-54mm_Lock_2pin_straight | P1 |
| 4 | CONN_01X05 | Socket_MOLEX-KK-RM2-54mm_Lock_5pin_straight | P2, P3, P4, P5 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P6 |
| 2 | PLATED_HOLE | PLATED_HOLE | MP1, MP2 |
| 1 | SW_PUSH | SW_KSEM31G | SW1 |
| 6 | TEST_1P | Measurement_Point_Round-SMD-Pad_Small | W1, W2, W3, W4, W5, W6 |
| 2 | MBR0520LT3G | SOD-123 | D1, D2 |
| 1 | 22 uH | SRF0703 | L1 |
| 1 | 6.8 uH | INDUCTOR_1812 | L2 |
| 3 | 22 uF | C_1206_HandSoldering | C1, C12, C17 |
| 7 | 100 nF | C_0603_HandSoldering | C2, C4, C7, C9, C11, C14, C19 |
| 3 | 10 uF | C_1206_HandSoldering | C3, C18, C20 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 18 pF | C_0603_HandSoldering | C5, C6 |
| 5 | 1 uF | C_0805_HandSoldering | C8, C10, C13, C16, C21 |
| 1 | 220 pF | C_0603_HandSoldering | C15 |
| 3 | NP | R_0603_HandSoldering | R1, R5, R27 |
| 3 | 10k | R_0603_HandSoldering | R2, R3, R4 |
| 1 | 330 | R_0603_HandSoldering | R6 |
| 8 | 1k | R_0603_HandSoldering | R7, R8, R9, R10, R17, R18, R19, R20 |
| 13 | 100k | R_0603_HandSoldering | R11, R12, R13, R14, R15, R16, R21, R22 +5 |
| 1 | 220k | R_0603_HandSoldering | R28 |
| 1 | 560k | R_0603_HandSoldering | R29 |
| 1 | 787k | R_0603_HandSoldering | R30 |
| 1 | 1M | R_0603_HandSoldering | R31 |
| 1 | 20k | R_0603_HandSoldering | R32 |
| 1 | 604k | R_0603_HandSoldering | R33 |
Ledplay design files
The KiCad project lives in the andbof/ledplay repository on GitHub; these links point at the commit this page was built from.
- Layoutledplay.kicad_pcb
Ledplay: common questions
How big is the Ledplay PCB?
The Ledplay measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ledplay?
86 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ledplay design files?
From the andbof/ledplay repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ledplay design in my own project?
Yes, under the terms of its BSD-3-Clause license, which andbof chose for the repository.