11 open source boards using the 4093
Real designs built with the 4093, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kraft80 REV2.2
ARMCoderBR
150.6 × 171.7 mm150 parts2LGPL-2.05GSE14
stonedDiscord
163 × 249 mm102 parts2LBSD-2-Clause5Digital clock
guilhermegch
100 × 100 mm96 parts2LNo license0Gsa d1
tjb803
100 × 100 mm94 parts2LMIT0Ledplay
andbof
50 × 50 mm86 parts4LBSD-3-Clause0ESP8266
HardDimmer
HenryqueFarias16
61.5 × 48.5 mm26 parts2LNo license0- schematic only · 39 parts
Yash redux
scottericpetersen
39 partsGPL-3.00 AlphaPlus
ARMCoderBR
150.6 × 110.4 mm78 parts2LGPL-2.05ChaosNAND
c-base
49.3 × 37.5 mm23 parts2LNo license2Mjk14v1
orri93
56.6 × 57.7 mm33 parts2LMIT1Gsa d1-s
tjb803
100 × 33 mm29 parts2LMIT0
How designs wire the 4093
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 4093 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 75% |
|
| GNDpin 7 | Connected to: GND 88% | — |
| Pin 8 | Connected to: Signal 75% · 5V 25% |
|
| Pin 13 | Connected to: Signal 63% · not connected 25% |
|
| VCCpin 14 | Connected to: 5V 100% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AlphaPlus by ARMCoderBR, GSE14 by stonedDiscord, ChaosNAND by c-base and Mjk14v1 by orri93.
The 4093 in open source designs
The gallery holds 11 open source boards using the 4093 from 9 GitHub repositories; a typical one measures about 100 × 78.8 mm and carries around 78 components.
90% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.
The most starred is Kraft80 REV2.2 by ARMCoderBR.
Microcontrollers on boards using the 4093
What boards using the 4093 are built for
4093: common questions
Where can I find a 4093 reference design?
Each of the 11 boards on this page is a real design using the 4093. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 4093?
The 4017, 74LS74 and L7805 appear in the most repositories here.
Which microcontrollers do boards using the 4093 use?
Most are built on ESP8266 (1).
How big is a typical board using the 4093?
The median is 100 × 78.8 mm, and 90% are two-layer designs.
What is the most popular open source board using the 4093?
By GitHub stars, Kraft80 REV2.2 by ARMCoderBR, with 5 stars.
Can I simulate one of these boards using the 4093 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.