Nfc tag

andreapiccini·spaghettilab-community·hardware/modules/nfc-tag/nfc-tag.kicad_pcb

Nfc tag PCB layout, top view — open source board by andreapiccini

About the Nfc tag PCB

Nfc tag is an open source PCB design by andreapiccini, published on GitHub under the Custom license license. It is a 2-layer board measuring 16.7 × 6.1 mm, with 3 components from 3 distinct parts.

Other key parts include the ST25TN01K-AFH5. By type, the board carries 1 IC and 1 capacitor.

From the project

SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.

This document describes how a Spaghetti LAB module identifies itself through an ST25TN01K NFC tag. It is intended for firmware, desktop-tool, registry, and manufacturing-tool developers.

The design deliberately keeps the tag small and stable. The tag does not contain the complete description of a module. Instead, it contains enough information to:

1. identify the module model; 2. identify the individual physical unit; 3. download the exact module definition from a registry; 4. verify that the downloaded definition is the expected one; 5. associate the NFC tag with the electronics connected…

Main components on the Nfc tag

Nfc tag bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
ST25TN01K-AFH5
ST(意法半导体)
U1
1
Net-Tie-Width-0.10mm
NT_TAG2
1
GCM1555C1H6R8FA16D
6.8pF 1%
muRata(村田)
C1

Nfc tag design files

The KiCad project lives in the andreapiccini/spaghettilab-community repository on GitHub; these links point at the commit this page was built from.

Nfc tag: common questions

How big is the Nfc tag PCB?

The Nfc tag measures 16.7 × 6.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nfc tag?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Nfc tag design files?

From the andreapiccini/spaghettilab-community repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Nfc tag design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in spaghettilab-community