HardLabs

JamieMotorControl

Andrewmh71·ROB421·hardware/Electrical/JamieMotorControl/JamieMotorControl.kicad_pcb

JamieMotorControl PCB layout, top view — open source board by Andrewmh71

About the JamieMotorControl PCB

JamieMotorControl is an open source PCB design by Andrewmh71, published on GitHub under the MIT license. It is a 2-layer board measuring 134.6 × 101.6 mm, with 27 components from 14 distinct parts.

Other key parts include the SN74HC126N, R-78E5.0-1.0 and MEGA_PRO_EMBED_CH340G___ATMEGA2560. By type, the board carries 9 diodes, 5 capacitors, 4 ICs, 3 relays, 3 resistors and 1 transistor.

It belongs with the robotics & motion designs in this gallery.

From the project

For Team 2

- 1x Mini Arduino ATMEGA2560, any manufacturer who matches this footprint/pinout will work. - 1x AMASS XT60PW-M Connector - 1x AMASS XT30PW-M Connector - 2.54mm pitch female header strips, for connecting the Arduino - DigiKey Part List

Main components on the JamieMotorControl

SN74HC126NR-78E5.0-1.0MEGA_PRO_EMBED_CH340G___ATMEGA2560

JamieMotorControl bill of materials (BOM)

27 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74HC126N
U1
2
R-78E5.0-1.0
U2, U3
1
MEGA_PRO_EMBED_CH340G___ATMEGA2560
U4
1
2N3904
Q2N3904
1
Conn_01x02
J5V1
1
Conn_01x02
JPWR1
3
PR24-5V-900-1A
K1, K2, K3
3
1N4732A
D1, D4, D7
3
1N4001
D2, D5, D8
3
40SQ045
D3, D6, D9
1
1mF
C1
4
10uF
C2, C3, C4, C5
2
1k
R1_1K1, R2_1K1
1
10k
R3_10K1

JamieMotorControl design files

The KiCad project lives in the Andrewmh71/ROB421 repository on GitHub; these links point at the commit this page was built from.

JamieMotorControl: common questions

How big is the JamieMotorControl PCB?

The JamieMotorControl measures 134.6 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the JamieMotorControl?

27 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the JamieMotorControl design files?

From the Andrewmh71/ROB421 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the JamieMotorControl design in my own project?

Yes, under the terms of its MIT license, which Andrewmh71 chose for the repository.

More boards in ROB421

Similar boards