Standig-899D
About the Standig-899D PCB
Standig-899D is an open source PCB design by andy5211d, published on GitHub. It is a board, with 55 components from 30 distinct parts.
Other key parts include the MOC3041M. By type, the board carries 31 resistors, 9 capacitors, 6 diodes, 4 switches, 2 transistors and 2 connectors.
From the project
899D Soldering Station PCB Details
Standig 899D Combo Hot Air & Soldering Station
Here is a mostly complete schematic and PCB pics of my 899D combo hot air & soldering station. Note, the schematic is a modified copy of the schematic from acbaruth/898D repository. I have not checked every component to see it they are correct for the 899D however the PCBs are simmular but not identical.
The Standig unit uses a 6 pin soldering iron connector. I have also used a Yihua 907H soldering iron sucessfully (as it comes with a 6pin plug and also has a movement sensor). But the internal connections of the iron must be modified by…
Main components on the Standig-899D
Standig-899D bill of materials (BOM)
55 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOC3041M | U1 | |
| 2 | 2N3904 | TO-92_Inline | Q1, Q2 |
| 2 | ~ | J1, J3 | |
| 1 | Auto/Manual | SW2 | |
| 1 | Up | SW4 | |
| 1 | Down | SW5 | |
| 1 | Enter | SW6 | |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 5 | M7 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3, D4, D5, D6 |
| 1 | 100nF 400V | C2 | |
| 2 | 220uF | C5, C6 | |
| 1 | 100uF | C7 | |
| 4 | 100nF | C8, C9, C10, C11 | |
| 1 | 100nF electrolytic | C14 | |
| 1 | 330R | R1 | |
| 1 | 20R | R2 | |
| 1 | 51R | R3 | |
| 1 | 620K | R4 | |
| 2 | 5.1K | R5, R6 | |
| 11 | 10K | R7, R18, R19, R20, R21, R33, R35, R43 +3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 7.5K | R8, R9 | |
| 2 | 200R | R10, R28 | |
| 1 | 6.7K | R11 | |
| 2 | 1.5K | R13, R30 | |
| 1 | 100K | R16 | |
| 1 | 200K | R17 | |
| 1 | 220K | R31 | |
| 1 | 1K | R34 | |
| 1 | 2.7K | R36 | |
| 2 | 270R | R39, R46 |
Standig-899D design files
The KiCad project lives in the andy5211d/Standig-899D repository on GitHub; these links point at the commit this page was built from.
- Schematicschematic/899d.kicad_sch
Standig-899D: common questions
How many components are on the Standig-899D?
55 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Standig-899D design files?
From the andy5211d/Standig-899D repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Standig-899D design in my own project?
The repository has no license, so all rights stay with andy5211d. Use it as a reference, and ask the author before reusing the design.