Mini-Inverter-PCB-Design-KiCAD-
About the Mini-Inverter-PCB-Design-KiCAD-
Mini-Inverter-PCB-Design-KiCAD- is an open source PCB design by anish1732, published on GitHub under the MIT license. It is a 2-layer board measuring 59.5 × 29.5 mm, with 19 components from 14 distinct parts.
Other key parts include the IR2153. By type, the board carries 6 resistors, 4 capacitors, 3 diodes, 2 transistors, 1 IC and 1 battery holder.
From the project
This repository contains the complete KiCad project files, schematics, PCB layout, and fabrication outputs for a mini inverter circuit. The design converts DC input into AC output using MOSFET switching and driver ICs, optimized for compact size and efficient performance.
Main components on the Mini-Inverter-PCB-Design-KiCAD-
Mini-Inverter-PCB-Design-KiCAD- bill of materials (BOM)
19 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IR2153 | DIP-8_W7.62mm | U1 |
| 2 | IRLZ24 | TO-220-3_Vertical | Q1, Q2 |
| 1 | 12V | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | BT1 |
| 1 | 10K 10k | Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | Step Down 240V to 12-012V | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | T1 |
| 2 | LED | LED_D5.0mm | D1, D3 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 470UF 470uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 0.01UF 0.01uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 47UF 47uF | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 0.2UF 0.2uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 3 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R6 |
| 1 | 22K 22k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 2 | 22R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5 |
Mini-Inverter-PCB-Design-KiCAD- design files
The KiCad project lives in the anish1732/Mini-Inverter-PCB-Design-KiCAD- repository on GitHub; these links point at the commit this page was built from.
- Layoutmini inverter.kicad_pcb
- Schematicmini inverter.kicad_sch
- BOMmini inverter BOM.csv
Mini-Inverter-PCB-Design-KiCAD-: common questions
How big is the Mini-Inverter-PCB-Design-KiCAD-?
The Mini-Inverter-PCB-Design-KiCAD- measures 59.5 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mini-Inverter-PCB-Design-KiCAD-?
19 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mini-Inverter-PCB-Design-KiCAD- design files?
From the anish1732/Mini-Inverter-PCB-Design-KiCAD- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mini-Inverter-PCB-Design-KiCAD- design in my own project?
Yes, under the terms of its MIT license, which anish1732 chose for the repository.