6 open source boards using the IR2153

Real designs built with the IR2153, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the IR2153

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the IR2153 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_1 pin has a capacitor to GND on 5 of 5 designs, most often 47 µF (then 100 nF).
  • The RT_2 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 15 kΩ).
  • The LO_5 pin has a series resistor on 5 of 5 designs, most often 22 Ω (then 1 kΩ).
  • The HO_7 pin has a series resistor on 5 of 5 designs, most often 22 Ω (then 10 Ω).
VCC_1pin 1Connected to: Signal 60% · 12V 40%
  • Capacitor to GND on 100% · 47 µF (3), 100 nF (2)
  • Series resistor on 60% · 1 kΩ (2)
RT_2pin 2Connected to: Signal 100%
  • Series resistor on 100% · 22 kΩ (3), 15 kΩ (1), 10 kΩ (1)
CT_3pin 3Connected to: Signal 100%
  • Capacitor to GND on 80% · 200 nF (2), 470 pF (1), 1 nF (1)
  • Series resistor on 60% · 15 kΩ (1), 10 kΩ (1), 22 kΩ (1)
COM_4pin 4Connected to: GND 80% · a signal 20%
LO_5pin 5Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (3), 1 kΩ (2), 10 Ω (1)
VS_6pin 6Connected to: GND 80% · a signal 20%
HO_7pin 7Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (3), 10 Ω (1), 2 Ω (1)
VB_8pin 8Connected to: Signal 80% · 12V 20%
  • Capacitor to GND on 80% · 47 µF (3), 10 µF (1)
  • Series resistor on 60% · 1 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include R2RDAC2026 REVIZE II by ERDALECE, DC-to-AC-push pull inverter-PCB by MatthewSchaar, Nixie by Synthron and Mini-Inverter-PCB-Design-KiCAD- by anish1732.

The IR2153 in open source designs

The gallery holds 6 open source boards using the IR2153 from 6 GitHub repositories; a typical one measures about 77 × 44.5 mm and carries around 19 components.

60% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is R2RDAC2026 REVIZE II by ERDALECE.

Microcontrollers on boards using the IR2153

What boards using the IR2153 are built for

IR2153: common questions

Where can I find a IR2153 reference design?

Each of the 6 boards on this page is a real design using the IR2153. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the IR2153 VCC_1 pin connected?

The VCC_1 pin has a capacitor to GND on 5 of 5 designs, most often 47 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the IR2153.

What resistor goes on the IR2153 RT_2 pin?

The RT_2 pin has a series resistor on 5 of 5 designs, most often 22 kΩ (then 15 kΩ). Counted from the KiCad layouts of 5 open source designs using the IR2153.

What resistor goes on the IR2153 LO_5 pin?

The LO_5 pin has a series resistor on 5 of 5 designs, most often 22 Ω (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the IR2153.

Which microcontrollers do boards using the IR2153 use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the IR2153?

The median is 77 × 44.5 mm, and 60% are two-layer designs.

What is the most popular open source board using the IR2153?

By GitHub stars, R2RDAC2026 REVIZE II by ERDALECE, with 5 stars.

Can I simulate one of these boards using the IR2153 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part