Saturation meter
AntoninPvr·saturation_meter
About the Saturation meter PCB
Saturation meter is an open source PCB design by AntoninPvr, published on GitHub. It is a 2-layer board measuring 138 × 111 mm, with 50 components from 22 distinct parts.
Other key parts include the LF33_TO220 and IR2112. By type, the board carries 20 resistors, 13 capacitors, 7 diodes, 5 connectors, 3 transistors and 2 ICs.
From the project
Small project to estimate saturation current of inductors
A simple saturation meter to estimate the saturation current of inductors.
This project is a quick and dirty implementation, and is not intended for production use. I need to measure the saturation current of some inductors for a project, so I built this tool to help me do that.
I used only parts I had lying around, and I want to use isolation milling, so the design is not optimal.

Main components on the Saturation meter
Saturation meter bill of materials (BOM)
50 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LF33_TO220 | TO-220-3_Vertical | U1 |
| 1 | IR2112 | DIP-14_W7.62mm | U2 |
| 2 | BUK556 | TO-220-3_Vertical | Q1, Q2 |
| 1 | BC638 | TO-92_Inline | Q4 |
| 1 | Vin | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | DUT | Banana_Jack_2Pin | J2 |
| 1 | Inputs | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Outputs | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | UC | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 3 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D1, D2, D3 |
| 2 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D4, D7 |
| 2 | LED | LED_D5.0mm | D5, D6 |
| 4 | 4700u | CP_Radial_D30.0mm_P10.00mm_SnapIn | C1, C2, C3, C4 |
| 4 | 1n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C5, C6, C7, C10 |
| 2 | 100n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C8, C11 |
| 3 | 2u2 | CP_Radial_D6.3mm_P2.50mm | C9, C12, C13 |
| 1 | 10 | R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R1 |
| 5 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R7, R13, R15, R16 |
| 7 | 8k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R12, R17, R18, R19, R20 |
| 4 | 1k6 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R11, R14 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R10 |
| 1 | 60m | R_Shunt_kelvin_60mohm | R9 |
Saturation meter design files
The KiCad project lives in the AntoninPvr/saturation_meter repository on GitHub; these links point at the commit this page was built from.
- Layoutsaturation_meter.kicad_pcb
- Schematicsaturation_meter.kicad_sch
Saturation meter: common questions
How big is the Saturation meter PCB?
The Saturation meter measures 138 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Saturation meter?
50 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Saturation meter design files?
From the AntoninPvr/saturation_meter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Saturation meter design in my own project?
The repository has no license, so all rights stay with AntoninPvr. Use it as a reference, and ask the author before reusing the design.