Netzteilplatine duale Spannungsversorgung
About the Netzteilplatine duale Spannungsversorgung PCB
Netzteilplatine duale Spannungsversorgung is an open source PCB design by apxco, published on GitHub. It is a 2-layer board measuring 161 × 86 mm, with 46 components from 10 distinct parts.
By type, the board carries 33 capacitors, 7 diodes, 2 connectors, 2 fuses and 2 resistors.
From the project
Netzteil Duale Ausgangsspannung unreguliert mit großer Kondensatorbank.
Netzteil Duale Ausgangsspannung unreguliert mit großer Kondensatorbank.
02/2026 Aufgebaut, funktioniert, C31 PAds vergrößert.
Netzteilplatine duale Spannungsversorgung bill of materials (BOM)
46 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x04_Female | TerminalBlock_RND_205-00278_1x04_P5.00mm_Vertical | J1 |
| 1 | Conn_01x06_Female | TerminalBlock_RND_205-00060_1x06_P5.00mm_45Degree | J2 |
| 2 | Fuse | Fuseholder_Littelfuse_100_series_5x20mm | F1, F2 |
| 4 | 1N5408 | D_DO-201AD_P15.24mm_Horizontal | D1, D2, D4, D5 |
| 1 | D_Bridge_-AA+ | Diode_Bridge_Vishay_GBU | D3 |
| 2 | LED | LED_D3.0mm_Clear | D6, D7 |
| 30 | C_Polarized | CP_Radial_D10.0mm_P5.00mm_P7.50mm | C1, C2, C3, C4, C5, C6, C7, C8 +22 |
| 1 | C_Small | C_Axial_L12.0mm_D6.5mm_P15.00mm_Horizontal | C31 |
| 2 | C | C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT | C32, C33 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
Netzteilplatine duale Spannungsversorgung design files
The KiCad project lives in the apxco/Kicad repository on GitHub; these links point at the commit this page was built from.
Netzteilplatine duale Spannungsversorgung: common questions
How big is the Netzteilplatine duale Spannungsversorgung PCB?
The Netzteilplatine duale Spannungsversorgung measures 161 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Netzteilplatine duale Spannungsversorgung?
46 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Netzteilplatine duale Spannungsversorgung design files?
From the apxco/Kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Netzteilplatine duale Spannungsversorgung design in my own project?
The repository has no license, so all rights stay with apxco. Use it as a reference, and ask the author before reusing the design.
More boards in Kicad
RP2040/RP2350RelaisAddierer
290.1 × 175 mm256 parts2LNo license0
AVR/ArduinoRelaisAdderII
183.3 × 105 mm160 parts2LNo license0
Transistor
152.4 × 76.2 mm115 parts2LNo license0
AVR/ArduinoDDS Modul 2
100 × 84 mm68 parts2LNo license0
H-Brücke
132.8 × 66.2 mm63 parts2LNo license0
OP-Damp
73.7 × 72.4 mm60 parts2LNo license0
AVR/ArduinoImpulsgenerator
99 × 48.5 mm43 parts2LNo license0
Netzteilplatine
161 × 86 mm38 parts2LNo license0
Verst LM3886
54.3 × 57.3 mm31 parts2LNo license0
Raspberry PiVolksz2
65 × 56.5 mm30 parts2LNo license0
Freqgenklein
49.5 × 39.5 mm25 parts2LNo license0