Shirasu ver 20
ar216-2355·shirasu_ver_20
About the Shirasu ver 20 PCB
Shirasu ver 20 is an open source STM32 PCB design by ar216-2355, published on GitHub. It is a 2-layer board measuring 82.8 × 41.9 mm, with 73 components from 40 distinct parts.
Its main chip is the C529355, from the STM32 family. Other key parts include the C10681, C90964, C133245, C5446 and C3236208. By type, the board carries 27 capacitors, 22 resistors, 8 connectors, 6 ICs, 4 transistors and 4 diodes.
Main components on the Shirasu ver 20
Shirasu ver 20 bill of materials (BOM)
73 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C10681 ACS712ELCTR-20A-T | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | C90964 DRV8701ERGER | QFN50P400X400X100-25N | U2 |
| 1 | C133245 ISO7241CDWR | SOIC127P1030X265-16N | U3 |
| 1 | C5446 XC6206PxxxMR | SOT-23-3 | U6 |
| 1 | C3236208 TCAN1057 | TSOT-23-8 | U7 |
| 1 | C529355 STM32G431CBT6 | LQFP-48_7x7mm_P0.5mm | U8 |
| 4 | C42420908 NTMFS5C628NLT1G | TRANS_NTMFS5C628NLT1G | Q1, Q2, Q3, Q4 |
| 1 | C393939 10155435-00011LF | AMPHENOL_10155435-00011LF | J1 |
| 1 | 8P8C_LED_Shielded_x2 | RJ45_Amphenol_RJHSE538X-02 | J2 |
| 1 | XT30_Pin | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J3 |
| 1 | XT30_Socket | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4 |
| 1 | write | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | encoder | ZH_4P | J6 |
| 1 | limit_sw | ZH_4P | J7 |
| 1 | Conn_02x03_Top_Bottom | PinHeader_2x03_P2.54mm_Vertical | J8 |
| 1 | C720477 SW_Push | SW_TS-1088-AR02016 | SW1 |
| 1 | C2297 GREEN | LED_0805_2012Metric | D1 |
| 2 | C2296 YELLO | LED_0805_2012Metric | D2, D4 |
| 1 | C84256 RED | LED_0805_2012Metric | D3 |
| 1 | C1002 FerriteBead | C_0603_1608Metric | FB1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | C14663 0.1u | C_0603_1608Metric | C1, C2, C8, C11, C12, C16, C17, C20 +5 |
| 6 | C15849 1u | C_0603_1608Metric | C3, C4, C7, C9, C10, C26 |
| 2 | C24497 0.1u | C_1206_3216Metric | C5, C19 |
| 1 | C2836442 100u | C_Elec_6.3x7.7 | C6 |
| 2 | C1588 1n | C_0603_1608Metric | C13, C14 |
| 1 | C1622 47n | C_0603_1608Metric | C15 |
| 1 | C3350 470u | C_Elec_10x10.2 | C18 |
| 1 | C19666 4.7u | C_0603_1608Metric | C24 |
| 1 | C22787 120 | R_0603_1608Metric | R1 |
| 3 | C25804 10k | R_0603_1608Metric | R2, R10, R14 |
| 1 | C4216 33k | R_0603_1608Metric | R3 |
| 2 | C23186 5.1k | R_0603_1608Metric | R4, R5 |
| 4 | C21190 1k | R_0603_1608Metric | R6, R7, R17, R18 |
| 1 | C4177 1.8k | R_0603_1608Metric | R8 |
| 1 | C22978 3.3k | R_0603_1608Metric | R9 |
| 1 | C23254 82k | R_0603_1608Metric | R11 |
| 1 | C23153 39k | R_0603_1608Metric | R12 |
| 1 | C4184 20k | R_0603_1608Metric | R13 |
| 2 | C22843 1.5k | R_0603_1608Metric | R15, R16 |
| 4 | C23179 470 | R_0603_1608Metric | R19, R20, R21, R22 |
Shirasu ver 20 design files
The KiCad project lives in the ar216-2355/shirasu_ver_20 repository on GitHub; these links point at the commit this page was built from.
- Layoutshirasu_ver_21.kicad_pcb
- Schematicshirasu_ver_21.kicad_sch
- BOMproduction/bom.xls
Shirasu ver 20: common questions
What microcontroller does the Shirasu ver 20 use?
The Shirasu ver 20 is built around the C529355, from the STM32 family.
How big is the Shirasu ver 20 PCB?
The Shirasu ver 20 measures 82.8 × 41.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shirasu ver 20?
73 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Shirasu ver 20 design files?
From the ar216-2355/shirasu_ver_20 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Shirasu ver 20 design in my own project?
The repository has no license, so all rights stay with ar216-2355. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Shirasu ver 20 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k