31 open source boards using the C5446
Real designs built with the C5446, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Kaleido 6" controller based on epdiy v7
vroland
138.1 × 104.6 mm121 parts4LCC-BY-SA-4.074RP2040/RP2350
Rana Tadpole V2
rana-sylvatica
172 × 107.7 mm144 parts2LNo license21STM32
Custom keyboard (f303)
howardt12345
395.3 × 138.1 mm421 parts2LCC-BY-NC-4.014RP2040/RP2350
MiniRazz
purdeaandrei
142.2 × 48 mm55 parts4LCERN-OHL-P-2.014STM32
Foc8313
williamhaarhoff
35 × 35 mm84 parts4LNo license9STM32
Maglev driver
Janky-Jingle-Crew
85 × 85 mm53 parts4LNo license3Adapter RCB F9T
carstenandrich
32 × 83 mm48 parts4LCERN-OHL-P-2.02STM32
Bldc hw
igorwolfs
100 × 60 mm175 parts4LGPL-3.01STM32
Vaucasy left
engemkeres
154 × 129.9 mm105 parts2LMIT1Raspberry Pi
Centauri2350
hridcode
28.2 × 71.3 mm60 parts2LNo license1AT86RF215-Breakout-Board
udayVsSharda
75 × 50 mm42 parts4LCERN-OHL-P-2.01Nordic nRF
Obscura60
HNBN9
285 × 96.5 mm158 parts2LNo license0Raspberry Pi
Polaris
hridcode
120 × 63 mm132 parts2LNo license0STM32
Drachma
coincase1
138.1 × 119.1 mm114 parts4LNo license0Raspberry Pi
Tesseract
hridcode
65 × 100 mm82 parts4LNo license0STM32
Shirasu ver 20
ar216-2355
82.8 × 41.9 mm73 parts2LNo license0RP2040/RP2350
Curly Mini v0
4n3m4i1
44.5 × 20 mm55 parts4LBSD-3-Clause0Nanoc6 mppt rs485 base
chinawrj
62 × 28 mm37 parts2LMIT0STM32
Transmitter
rjacoby00
44.6 × 31.8 mm37 parts4LNo license0ESP32
Epdiy v7
vroland
100 × 55 mm108 parts4LCC-BY-SA-4.074RP2040/RP2350
Rana Tadpole
rana-sylvatica
172 × 107 mm53 parts2LNo license21RP2040/RP2350
Monorail Steam Reduced
KiserDesigns
242.9 × 95.3 mm185 parts2LNo license18STM32
Custom keyboard (f103, fe2.1)
howardt12345
395.3 × 138.1 mm414 parts2LCC-BY-NC-4.014STM32
Vaucasy right
engemkeres
154 × 129.9 mm105 parts2LMIT1Waffle Mini v0
4n3m4i1
35.6 × 17.8 mm47 parts4LBSD-3-Clause0PGL FTDI Prog
4n3m4i1
42 × 22 mm46 parts4LMIT0Parc
rjacoby00
124.5 × 43.2 mm19 parts2LNo license0Rana Tadpole DB
rana-sylvatica
24 × 20.5 mm10 parts2LNo license21STM32
Custom keyboard (f303, fe2.1)
howardt12345
395.3 × 138.1 mm413 parts2LCC-BY-NC-4.014STM32
Keyboard0 - SK6812
howardt12345
377.8 × 134.1 mm329 parts2LCC-BY-NC-4.014STM32
Keyboard0
howardt12345
377.8 × 134.1 mm246 parts2LCC-BY-NC-4.014
How designs wire the C5446
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the C5446 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 18 of 21 designs, most often 1 µF (then 10 µF).
- The VI pin has a decoupling capacitor on 18 of 21 designs, most often 1 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 76% · a signal 19% |
|
| VIpin 3 | Connected to: 5V 81% · a signal 19% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Epdiy v7 by vroland, Rana Tadpole DB by rana-sylvatica, Monorail Steam Reduced by KiserDesigns and Keyboard0 by howardt12345.
The C5446 in open source designs
The gallery holds 31 open source boards using the C5446 from 21 GitHub repositories; a typical one measures about 120 × 83 mm and carries around 84 components.
55% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Kaleido 6" controller based on epdiy v7 by vroland.
Parts used alongside the C5446
Microcontrollers on boards using the C5446
What boards using the C5446 are built for
C5446: common questions
Where can I find a C5446 reference design?
Each of the 31 boards on this page is a real design using the C5446. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C5446 VO pin?
The VO pin has a decoupling capacitor on 18 of 21 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 21 open source designs using the C5446.
What decoupling capacitors do designs use on the C5446 VI pin?
The VI pin has a decoupling capacitor on 18 of 21 designs, most often 1 µF (then 22 µF). Counted from the KiCad layouts of 21 open source designs using the C5446.
What parts are used alongside the C5446?
The C2040, C181692, C107671, C108516 and C2827654 appear in the most repositories here.
Which microcontrollers do boards using the C5446 use?
Most are built on STM32 (13), RP2040/RP2350 (5), Raspberry Pi (3) and ESP32 (2).
How big is a typical board using the C5446?
The median is 120 × 83 mm, and 55% are two-layer designs.
What is the most popular open source board using the C5446?
By GitHub stars, Kaleido 6" controller based on epdiy v7 by vroland, with 74 stars.
Can I simulate one of these boards using the C5446 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.