HardLabs

Jumperless-Probe

Architeuthis-Flux·Jumperless-Probe

Jumperless-Probe PCB layout, top view — open source board by Architeuthis-Flux

About the Jumperless-Probe PCB

Jumperless-Probe is an open source PCB design by Architeuthis-Flux, published on GitHub under the MIT license. It is a 2-layer board measuring 123.2 × 25.4 mm, with 6 components from 6 distinct parts.

By type, the board carries 4 connectors, 1 switch and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

A probe for your Jumperless

You can even wire an OLED to it and have it show you stuff while you're probing (the button is mounted under the display, so you press on the screen itself.

https://github.com/Architeuthis-Flux/Jumperless-Probe/assets/20519442/1eab6d69-ecf2-4003-92da-1a2ce37a83ef

If you don't feel like opening the schematic, here it is in text:

Or you can put an LED on there and the signal from the probe will light it up when it's active

Jumperless-Probe bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
Conn_01x02
J1
1
Conn_01x01
J2
1
Conn_01x01
J3
1
Conn_01x01
J4
1
SW_DIP_x01
SW1
1
2.2k
R1

Jumperless-Probe design files

The KiCad project lives in the Architeuthis-Flux/Jumperless-Probe repository on GitHub; these links point at the commit this page was built from.

Jumperless-Probe: common questions

How big is the Jumperless-Probe PCB?

The Jumperless-Probe measures 123.2 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jumperless-Probe?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jumperless-Probe design files?

From the Architeuthis-Flux/Jumperless-Probe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Jumperless-Probe design in my own project?

Yes, under the terms of its MIT license, which Architeuthis-Flux chose for the repository.

Similar boards