Sm2m sdmmc

artemkorobko·sm2m-sdmmc·schematics-v2/schematics.kicad_pcb

Sm2m sdmmc PCB layout, top view — open source STM32 board by artemkorobko

About the Sm2m sdmmc PCB

Sm2m sdmmc is an open source STM32 PCB design by artemkorobko, published on GitHub. It is a 4-layer board measuring 96 × 50 mm, with 47 components from 23 distinct parts.

Its main chip is the STM32F407VET6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 17 capacitors, 15 resistors, 5 diodes, 4 connectors, 2 ICs and 1 transistor.

From the project

SM2M SDMMC Adapter

Main components on the Sm2m sdmmc

Sm2m sdmmc bill of materials (BOM)

47 components, 23 distinct parts.

QtyPartRefs
1
STM32F407VET6
U1
1
AMS1117-3.3
U2
1
AO3401A
Q1
1
16Mhz
Y1
1
2K
J1
1
POWER
J2
1
Micro SD Card
J3
1
SWD
J4
1
100mA
F1
1
RED
D1
1
YELLOW
D2
1
GREEN
D3
1
uClamp0501H
D4
1
WHITE
D5
1
120R @ 100Mhz
FB1
2
10uF
C1, C16
9
100nF
C2, C5, C7, C8, C9, C11, C12, C13 +1
2
2.2uF
C3, C4
2
10pF
C6, C10
2
22uF
C14, C15
Show 3 more
QtyPartRefs
4
1.5k
R1, R2, R3, R6
10
10k
R4, R7, R8, R9, R10, R11, R12, R13 +2
1
22R
R5

Sm2m sdmmc design files

The KiCad project lives in the artemkorobko/sm2m-sdmmc repository on GitHub; these links point at the commit this page was built from.

Sm2m sdmmc: common questions

What microcontroller does the Sm2m sdmmc use?

The Sm2m sdmmc is built around the STM32F407VET6, from the STM32 family.

How big is the Sm2m sdmmc PCB?

The Sm2m sdmmc measures 96 × 50 mm, has 4 copper layers and is 1.62684 mm thick.

How many components are on the Sm2m sdmmc?

47 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sm2m sdmmc design files?

From the artemkorobko/sm2m-sdmmc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sm2m sdmmc design in my own project?

The repository has no license, so all rights stay with artemkorobko. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sm2m sdmmc without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards