HoloGraphic-Desk-Sign

ashar-mohd-rehman·HoloGraphic-Desk-Sign·Pcb/pcb.kicad_pcb

HoloGraphic-Desk-Sign PCB layout, top view — open source board by ashar-mohd-rehman

About the HoloGraphic-Desk-Sign PCB

HoloGraphic-Desk-Sign is an open source PCB design by ashar-mohd-rehman, published on GitHub under the MIT license. It is a 2-layer board measuring 25.8 × 29.8 mm, with 10 components from 5 distinct parts.

By type, the board carries 5 resistors, 3 diodes, 1 connector and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

a holographic desk sign which uses usb c as its power source and displays cool holograms

a holographic desk sign which uses usb c as its power source and displays cool holograms. Custom edge-lit acrylic desk sign displaying death star. Powered via a 5V USB-C interface with low-current 470ohm resistors for safe and cool desk lamp. It sits inside a custom designed 3d printed case with slot to change the sign and a push button to switch it on/off

Bom Link : https://docs.google.com/spreadsheets/d/16aCT9J3KGzLhZE3Ovagxlka1-57kigsySBzX7_v0wDE/edit?usp=sharing

HoloGraphic-Desk-Sign, from the project README
From the project README

HoloGraphic-Desk-Sign bill of materials (BOM)

10 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USB_C_Receptacle_USB2.0_16P
J1
1
SW_Push
SW1
3
LED
D1, D2, D3
2
5.1k
R1, R2
3
220
R3, R4, R5

HoloGraphic-Desk-Sign design files

The KiCad project lives in the ashar-mohd-rehman/HoloGraphic-Desk-Sign repository on GitHub; these links point at the commit this page was built from.

HoloGraphic-Desk-Sign: common questions

How big is the HoloGraphic-Desk-Sign PCB?

The HoloGraphic-Desk-Sign measures 25.8 × 29.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HoloGraphic-Desk-Sign?

10 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HoloGraphic-Desk-Sign design files?

From the ashar-mohd-rehman/HoloGraphic-Desk-Sign repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HoloGraphic-Desk-Sign design in my own project?

Yes, under the terms of its MIT license, which ashar-mohd-rehman chose for the repository.

Similar boards